Street Fighter X Tekken AllTU +4 Trainer updated 9/22/2013

[eco95]

okay found another flaw, I was testing all codes using 4 bytes values on Joystick and reverted codes to 1 byte before releasing the Trainer, forgot to change the 02 to 00 in the Xbox360 button codes in the process.
Made so many mistakes lately :(

Hi optantic,

I tried your latest codes. Inf super works.
I still can't get inf HP to work. (Neither after hit nor during super art)

Should I make a memory dump? or just wait for your TU5 codes ?

Thanks so much again!

P.S. I tried the TU3 codes you posted , still the same result.

[optantic]

Hi optantic,

I tried your latest codes. Inf super works.
I still can't get inf HP to work. (Neither after hit nor during super art)

Should I make a memory dump? or just wait for your TU5 codes ?

Thanks so much again!

P.S. I tried the TU3 codes you posted , still the same result.

I think the button address would be the same on all TUs

you could try 2 things
1. Check button address and HP address with PeekPoker, set length to 100:
#P1 Infinite HP (Somewhat)[use together with 2hit Kill Auto OFF], push LT+RT+Left after got hit
#14 C01BD316 0400FFFF 01 <---to make it easier, peek then hold LT+RT and peek again to see if this address changes from 00000000 to 0000FFFF
#00 8238A564 92 <--- Peek and see if this Address original value is 917E0020
#14 C01BD336 0400FFFF 01 <---to make it easier, peek then hold LT+RT and peek again to see if this address changes from 00000000 to 0000FFFF
#00 8238A564 92

#Note: Infinite HP, sometimes might need to hold buttons down for a few seconds

2. remove the buttons codes and only use
#2hit kill affects both players
00 8238A564 90

[eco95]

I think the button address would be the same on all TUs

you could try 2 things
1. Check button address and HP address with PeekPoker, set length to 100:
#P1 Infinite HP (Somewhat)[use together with 2hit Kill Auto OFF], push LT+RT+Left after got hit
#14 C01BD316 0400FFFF 01 <---to make it easier, peek then hold LT+RT and peek again to see if this address changes from 00000000 to 0000FFFF
#00 8238A564 92 <--- Peek and see if this Address original value is 917E0020
#14 C01BD336 0400FFFF 01 <---to make it easier, peek then hold LT+RT and peek again to see if this address changes from 00000000 to 0000FFFF
#00 8238A564 92

#Note: Infinite HP, sometimes might need to hold buttons down for a few seconds

2. remove the buttons codes and only use
#2hit kill affects both players
00 8238A564 90

Thank you so much, optantic for helping and teaching! ^_^

I will try activating [#2hit kill affects both players] to see if that's the problem or the button codes problem~

I will report back after trying~~ ^_^

As for the PeekPoker button address tutorial,
I can't test it because whenever I try to open peekPoker problem,
I got an error saying..."The problem has been stopped working......"

[optantic]

Thank you so much, optantic for helping and teaching! ^_^

I will try activating [#2hit kill affects both players] to see if that's the problem or the button codes problem~

I will report back after trying~~ ^_^

As for the PeekPoker button address tutorial,
I can't test it because whenever I try to open peekPoker problem,
I got an error saying..."The problem has been stopped working......"

try use an older version and see if it works or you could peek with RtCod
http://www.360haven.com/forums/showt...976-Peek-Poker

it can't be UMK3 all over again, cause my address matches with ioritree's on NO TU

File Updated:
Added TU5 codes and redo all HP codes by taking a different approach, you'll still need the button address to make them work tho

[eco95]

try use an older version and see if it works or you could peek with RtCod
http://www.360haven.com/forums/showt...976-Peek-Poker

it can't be UMK3 all over again, cause my address matches with ioritree's on NO TU

File Updated:
Added TU5 codes and redo all HP codes by taking a different approach, you'll still need the button address to make them work tho

Thanks so much for updating the codes to TU5~ Here is the result of my testing..

I have inf. super working , but the button codes still don't work for me.


I tried only using #2hit kill affects both players 00 8238A564 90

It works, so it must be the button codes causing the problem.


I guess in order to solve my problem , I have to peek with RtCod then.
None of the PeekPoker version works on my computer.. too bad for me~

Again, thank you so so much to both optantic and ioritree for this awesome trainer! ^_^


P.S. just wanna make sure that [#Xbox360 Controller Codes] are for Wireless controller , right??

[ioritree]

eco95 try this (No TU)

0xC379F574 00000C01 (LT+RT+UP)
0xC379F574 00000C04 (LT+RT+LEFT)

*UP and LEFT is D-pad

#Instant Kill, Hold LT+RT+Up for few seconds during the start of a Cross or Super Art
14 C379F574 00000C01 01
00 8238A564 90
14 C379F574 00000C01 01
00 8238A564 90

#P1 Infinite HP (Somewhat), hold LT+RT+Left as you're getting hit
14 C379F574 00000C04 01
00 8238A564 92
14 C379F574 00000C04 01
00 8238A564 92

Thank optantic make a good trainer :)
Nice video :)

[optantic]

I guess in order to solve my problem , I have to peek with RtCod then.
None of the PeekPoker version works on my computer.. too bad for me~

P.S. just wanna make sure that [#Xbox360 Controller Codes] are for Wireless controller , right??

It is for Wireless Controller and my guess is that your PC is not running Windows 7? I could get it to work on Windows XP.
Try ioritree's codes on NO TU only and see if it works everytime, but I thought anything above C3xxxxxx could be dynamic (at least when using TUs), that's why I didn't use that button address

eco95 try this (No TU)

0xC379F574 00000C01 (LT+RT+UP)
0xC379F574 00000C04 (LT+RT+LEFT)

Thank optantic make a good trainer :)
Nice video :)

you could shorten the codes to
#Instant Kill, Hold LT+RT+Up for few seconds during the start of a Cross or Super Art
14 C379F574 00000C01 01
00 8238A564 90

#P1 Infinite HP (Somewhat), hold LT+RT+Left as you're getting hit
14 C379F574 00000C04 01
00 8238A564 92

[capitansky]

nice video optanic but I've the same problem that eco I've tried the codes of ioritree but not work for me