Was just forced into the life of 360slim and cannot find a way to transfer modded save(tons of hit points) to my unmodded 360slim. In my old 360 all i had to do is transfer it over with my memory card. How can I do it with this one. Thanks ^_^
Results 1 to 7 of 7
-
11-09-2011 #1
Inactive Member
Join Date : Nov 2011
Posts : 5
Array
WARNING noob question about saves
-
11-09-2011 #2
Haven Donator
Join Date : Dec 2010
Posts : 382
ArrayRe: WARNING noob question about saves
Format a USB drive on your Xbox 360 and then it will work just like your Memory Card
-
11-09-2011 #3
Extorris
Join Date : Nov 2010
Location : United Kingdom
Posts : 2,626
ArrayRe: WARNING noob question about saves
Either you can use a USB Flash Drive or if you have one of the X360 USB memory card transfer kits you can plug the memory card into that and since it's USB on the end, right into the xbox 360.
Downloads : 65 || Uploads : 0 || Rep Power : 8131 || Posts : 2,626 || Thanks : 181 || Thanked 2,896 Times in 827 Posts
Renegade's Services: All services require you to pay the Postage and Packaging any method you prefer. Shipping within the UK only unless special circumstances.
Xbox 360:
DVD Drive Flashing - £10 (depending on console type, you may need to purchase a new PCB for Slim Consoles) - Includes backup of your drive files and DVD key on a CD-ROM
DVD Key Retrieval - £10 - Does not include the DVD Drive being flashed.
JTAG Installations - £15 - Complete installation of the JTAG exploit - Original NAND Backups and starter software on a CD-ROM- Extra £5 for FSD/Homebrew/Games Setup!
Reset Glitch Hack (RGH) Installations - £20 + Money for the Glitch Chip of your choice - Dual/Triple-NAND addons are £5 more and you also provide the money for the Dual/Triple Chip
xKey/Wasabi Installations - £70-80 (Including the device + DVD retrieval)
RRoD Reflow Service - £20
RRoD Reballing Service - £40-60 price varies depending on the chip. It may have to be refitted with a new GPU or CPU chip
Nintendo Wii Softmodding - £15 including SD card pre-loaded with apps and NAND Backup.
Nintendo DS/DSL/DSi Flashcart Installation - £15 including Flashcard
Playstation 3: Softmodding + Backuploader/Homebrew set up - £15 - Must be on firmware 3.55 or below.
For more information or if you are interested. PM me or contact me on Skype: ProjectRGX or AIM: Renegade1990
-
11-09-2011 #4
Program Engineer
Join Date : Dec 2010
Age : 35
Posts : 1,660
ArrayRe: WARNING noob question about saves
dont forget to Rehash/Resign the save with youre Console/Profile ID
-
11-09-2011 #5
Inactive Member
Join Date : Nov 2011
Posts : 5
ArrayRe: WARNING noob question about saves
Where do I fine the id's
-
11-10-2011 #6
Inactive Member
Join Date : Sep 2011
Location : Florida
Posts : 29
ArrayRe: WARNING noob question about saves
Originally Posted by akira022
Drag and Drop the save into Modio/Horizon 360/Le Fluffie etc.
Then instantly there should be numbers in two rows.
One should say "Console ID" and the other "Profile ID".
Just replace these with your own by doing the same, Drag and Drop and Copy and Paste.
-
11-10-2011 #7
Inactive Member
Join Date : Nov 2011
Posts : 5
ArrayRe: WARNING noob question about saves
I looked at my system settings on console and I found console id with 12 chars and a serial # that is also 12 chars. the console in wont fit in Horizon 360. I also tried to format a 4 gig stick and it was filled up with data001, data002 and so on. So far these new 360's are a pain. All of this took a whole 5 minutes with the old system.
Similar Threads
-
NOOB WITH QUESTION EVERYBODY RUN!!!!
By kfcpork in forum Ps3 Modded GamesavesReplies: 1Last Post: 09-28-2014, 05:53 PM -
Noob Question: What is a trainer?
By Zaid in forum General DiscussionReplies: 8Last Post: 05-22-2012, 05:16 AM
Visitors found this page by searching for:
Tags for this Thread
Posting Permissions
