360haven works best with JavaScript enabled
[Tutorial] Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)
Loading
Register
Results 1 to 6 of 6
  1. #1
    Extorris
    Renegade is offline
    Join Date : Nov 2010
    Location : United Kingdom
    Posts : 2,626
    Array

    red heart Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)

    As a lot of you know. The SLIM drives are unique and there is a lot of faffing around when it comes to SLIM drives. If you had an RGH like me with no drive and you wish to use a SLIM drive in there. Well this tutorial is for you.

    What you will need is:

    1. Xbox 360 SLIM that is exploited with the Reset Glitch Hack
    2. UNLOCKED 16D4S DVD Drive. (Whether this is an unlocked PCB or a drive you have unlocked with trace cuts and soldering)
    3. J-Runner (Or any other image builder of your, choice) and Jungle Flasher Software.
    4. Hardware to flash your NAND. NAND-X or any other SPI Flasher that will get the job done. You can also use a software flasher such as Flash360 or RAWFLASH. But Hardware is always the best choice.

    Finally, you will need the donor SLIM DVD files which I have added as an attachment below.


    Step 1. You're going to need to Open your NAND with your CPU Key of course in the program of your choice. Again I am using Jrunner for this tutorial.






    Step 2 - THIS WILL NOT BE COVERED. If you do not know how to flash or spoof DVD keys to your console..get someone who can for you. In simple terms though, you would open JungleFlasher and load the source firmware as the donor file listen above for your drive. Once loaded, click yes to the AUTO SPOOF and leave everything as it is. You must not try and spoof the key....I REPEAT KEEP EVERYTHING AS IT IS!

    Then write the firmware as it is to your drive.



    Step 3 - Now we are going to build the NAND image for your console to accept the drive as It's own.

    Load your dump, and input your CPU KEY (JRunner does it automatically for you if you have used it there before)

    Then you will Click XeBuild Patches and Enable the NoFCRT patch. It will automatically write it to the settings loader for when you create the image. Next you will want to hit the Advanced XeBuild Options on the right hand side of JRunner, it will open up a new window...Go to the Machine Settings tab, and input the DVD KEY that was loaded from the SLIMKEY Extract file.
    Simple hit Okay after that and create your image. Flash it to your console via the NAND Flasher of your choice :)











    This tutorial was brought to you by Renegade of 360Haven :)
    Attached Files Attached Files

  2. The Following 5 Users Say Thank You to Renegade For This Useful Post:


  3. #2
    Eternal Dragoon
    Rpg_Fan

    Serious_M is offline
    Join Date : Dec 2010
    Location : Netherlands , Amsterdam
    Age : 33
    Posts : 13,032
    Array

    Re: Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)

    very nice Tutorial renegade
    Downloads : 57 || Uploads : 1 || Rep Power : 16110 || Posts : 13,032 || Thanks : 3,661 || Thanked 1,791 Times in 1,446 Posts


    Serious_M

  4. #3
    Retired Staff

    thegutta is offline
    Join Date : Jun 2011
    Location : On Top Of The World
    Posts : 10,475
    Array
    Twitter: @
    Awesome tut Renegade :)
    Downloads : 47 || Uploads : 0 || Rep Power : 13180 || Posts : 10,475 || Thanks : 3,231 || Thanked 1,396 Times in 1,224 Posts




  5. #4
    The Immortal God
    Rpg_Fan

    CloudStrife7x is offline
    Join Date : Dec 2010
    Location : Unknown
    Age : 29
    Posts : 18,760
    Array
    Twitter: @

    Re: Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)

    simply put great tut bro :D
    Downloads : 157 || Uploads : 0 || Rep Power : 22150 || Posts : 18,760 || Thanks : 4,451 || Thanked 3,095 Times in 2,607 Posts



  6. #5
    Traine Dev

    fullmetal172 is offline
    Join Date : Jun 2011
    Location : New York, New York, United States
    Posts : 1,479
    Array
    Twitter: @

    Re: Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)

    great tutorial Renegade
    Downloads : 58 || Uploads : 0 || Rep Power : 3956 || Posts : 1,479 || Thanks : 1,539 || Thanked 453 Times in 197 Posts




  7. #6
    Haven's Warrior lv8
    rghjtagpro

    boogieman is offline
    Join Date : Nov 2011
    Location : usa
    Posts : 522
    Array

    Re: Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)

    Quote Originally Posted by Renegade View Post
    As a lot of you know. The SLIM drives are unique and there is a lot of faffing around when it comes to SLIM drives. If you had an RGH like me with no drive and you wish to use a SLIM drive in there. Well this tutorial is for you.

    What you will need is:

    1. Xbox 360 SLIM that is exploited with the Reset Glitch Hack
    2. UNLOCKED 16D4S DVD Drive. (Whether this is an unlocked PCB or a drive you have unlocked with trace cuts and soldering)
    3. J-Runner (Or any other image builder of your, choice) and Jungle Flasher Software.
    4. Hardware to flash your NAND. NAND-X or any other SPI Flasher that will get the job done. You can also use a software flasher such as Flash360 or RAWFLASH. But Hardware is always the best choice.

    Finally, you will need the donor SLIM DVD files which I have added as an attachment below.


    Step 1. You're going to need to Open your NAND with your CPU Key of course in the program of your choice. Again I am using Jrunner for this tutorial.






    Step 2 - THIS WILL NOT BE COVERED. If you do not know how to flash or spoof DVD keys to your console..get someone who can for you. In simple terms though, you would open JungleFlasher and load the source firmware as the donor file listen above for your drive. Once loaded, click yes to the AUTO SPOOF and leave everything as it is. You must not try and spoof the key....I REPEAT KEEP EVERYTHING AS IT IS!

    Then write the firmware as it is to your drive.



    Step 3 - Now we are going to build the NAND image for your console to accept the drive as It's own.

    Load your dump, and input your CPU KEY (JRunner does it automatically for you if you have used it there before)

    Then you will Click XeBuild Patches and Enable the NoFCRT patch. It will automatically write it to the settings loader for when you create the image. Next you will want to hit the Advanced XeBuild Options on the right hand side of JRunner, it will open up a new window...Go to the Machine Settings tab, and input the DVD KEY that was loaded from the SLIMKEY Extract file.
    Simple hit Okay after that and create your image. Flash it to your console via the NAND Flasher of your choice :)









    This tutorial was brought to you by Renegade of 360Haven :)
    thanx man looking for this for a long time nice work

 

 

Similar Threads

  1. Replies: 0
    Last Post: 12-17-2013, 08:00 AM
  2. My Slim rgh is coming soon
    By actualmanx in forum General Discussion
    Replies: 3
    Last Post: 03-28-2012, 04:05 PM
  3. New DVD Drive Discovered in XBOX360 Slim Hitachi DLN10N 0500″
    By jkipp82 in forum Xbox 360 Scene News
    Replies: 0
    Last Post: 12-24-2010, 04:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     

About 360haven

    360haven is an Forum Devoted To Game modding Fans from all over the world.

    An Awesome Community of Xbox 360 Gamers, Modders and Developers who Create & Share Tutorials, Applications, Gfx, Trainers and Gamesaves.

    A haven for the l33t.
    A scarce paradise for modders.

Like this page

Google+