360haven works best with JavaScript enabled
rgh help
Loading
Register
Page 1 of 2 12 LastLast
Results 1 to 8 of 9

Thread: rgh help

  1. #1
    Junior Member
    andygreenhough is offline
    Join Date : Apr 2013
    Posts : 6
    Array

    rgh help

    I've just ordered a jr programmer v2. Which glitch chip would u recommend me buying? I have the xbox slim trinty console. I'm a bit of notice at this should I get a qsb board aswell..



    Could people give me Web links for stuff to buy I'm ok with the soldering bit.

    The part I've been recommended so far is the coolrunner rev c should I go with this one

  2. #2
    Junior Member
    andygreenhough is offline
    Join Date : Apr 2013
    Posts : 6
    Array

    Re: rgh help

    My dvd drive not working I'm not sure why but I believe the previous owner tried flashing it and possibly lost the dvd key

  3. #3
    Member
    Omega
    24Karot is offline
    Join Date : May 2014
    Location : 360haven
    Posts : 31
    Array

    Re: rgh help

    Quote Originally Posted by andygreenhough View Post
    I've just ordered a jr programmer v2. Which glitch chip would u recommend me buying? I have the xbox slim trinty console. I'm a bit of notice at this should I get a qsb board aswell..

    Could people give me Web links for stuff to buy I'm ok with the soldering bit.

    The part I've been recommended so far is the coolrunner rev c should I go with this one
    Depends what dashboard you are on,because trinitys could have RGH1 (fast boot) but if it is past dash 2.0.14699.0 then its RGH2.The best chip would have to be TX slim proto or the new CR4 xl.
    Get the QSB aswell if you are not that experienced at soldering.

  4. #4
    Member
    Omega
    24Karot is offline
    Join Date : May 2014
    Location : 360haven
    Posts : 31
    Array

    Re: rgh help

    Quote Originally Posted by andygreenhough View Post
    My dvd drive not working I'm not sure why but I believe the previous owner tried flashing it and possibly lost the dvd key
    Is this from the same console you wanted to RGH? if so when you get everything,boot xell & you will be able to get the dvd key.

  5. #5
    Junior Member
    andygreenhough is offline
    Join Date : Apr 2013
    Posts : 6
    Array

    Re: rgh help

    I've managed to rgh . And I have the dvd key. How can I flash the the pcb board in the disc drive so I can fully test the disc drive. ?

  6. #6
    Member
    Omega
    24Karot is offline
    Join Date : May 2014
    Location : 360haven
    Posts : 31
    Array

    Re: rgh help

    I dont know exactly why it is not working,but if it because of a bad flash,1.did your friend dump the original firmware? 2.Are you keeping it as a RGH?
    If you cant get the original dump,find out what dvd drive you have & download the stock firmware for it and flash it to your NAND (dvd key needed),then flash your NAND to the console.
    If you want to put it as retail,you will need to go down a different route.

  7. #7
    Junior Member
    andygreenhough is offline
    Join Date : Apr 2013
    Posts : 6
    Array

    Re: rgh help

    Personally I think the laser or the worm motor is broken..(sounds like it's juddering when reading disc) it judders went no disc in even on start up. I've ordered a repair kit from the states so gunna try that . I'm planning on keeping the rgh . When I did the rgh I got the dvd key. Is there a way to flash it with the stock firmware with out buying any expensive equipment?

  8. #8
    Member
    Omega
    24Karot is offline
    Join Date : May 2014
    Location : 360haven
    Posts : 31
    Array

    Re: rgh help

    Quote Originally Posted by andygreenhough View Post
    Personally I think the laser or the worm motor is broken..(sounds like it's juddering when reading disc) it judders went no disc in even on start up. I've ordered a repair kit from the states so gunna try that . I'm planning on keeping the rgh . When I did the rgh I got the dvd key. Is there a way to flash it with the stock firmware with out buying any expensive equipment?
    Yes,like i said in my previous post,but only if you were to keep it as RGH,flash it to your NAND.
    I think that juddaring is normal on boot up.
    Downloads : 1 || Uploads : 0 || Rep Power : 0 || Posts : 31 || Thanks : 14 || Thanked 3 Times in 3 Posts


    Au is my favorite element!:-c

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. [Tutorial] Slim RGH 16D4S NO Dummy.bin - How To Replace DVD Drive (For RGH)
    By Renegade in forum Xbox 360 Tutorials
    Replies: 5
    Last Post: 10-03-2012, 04:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     

About 360haven

    360haven is an Forum Devoted To Game modding Fans from all over the world.

    An Awesome Community of Xbox 360 Gamers, Modders and Developers who Create & Share Tutorials, Applications, Gfx, Trainers and Gamesaves.

    A haven for the l33t.
    A scarce paradise for modders.

Like this page

Google+