Dead or Alive 4 NTSC/U&PAL Media ID 606FFE2A, NTSC/J Media ID 2A21D923 +2 Trainer

[optantic]

Dead or Alive 4 +2 Trainer NTSC/U&PAL [544307D1] Media ID 606FFE2A by optantic

Trainer features:
P1 Infinite HP
P2(CPU) Starts with 1 HP

Instruction:
Run it like all other trainers or read the readme.txt

Note: Check your default.xex Media ID with the abgx360 or 360 Content Manager software

Version 2: Added codes for NTSC/J Media ID 2A21D923
http://www.mediafire.com/?q474a3dyyld72ry

If your default.xex Media ID is 2AD7FA3A, you could replace it with this default.xex, Media ID 2A21D923, provided by eco95.
http://www.mediafire.com/?39tz8865lf9g1ie



http://www.youtube.com/watch?v=jIi8fpy5fTI

[Cheatahh]

I think this is one of the top 5 wanted trainers. Very well done optantic in giving something so many people want :-) +++++REP

[Cheatahh]

Is there any special way to run this trainer?. I start the game and I use the back button- get cheats enabled but still take damage and p2 still has full health. Tried in story , versus and survival.
Was really hoping to use this in survival.
Any TU's required ? or anything else? Im willing to try anything...
Maybe someone else can confirm its working ?

[optantic]

I tried to search for a Title Update but couldn't find any , so it's no title update

Code works fine in Story, VS, Time Attack, Survival, Team Battle

remove the # in front of the codes

[speedfly]

nice work thanks

[Cheatahh]

I did remove the #'s. I have used many trainers , this is actually the first one which doesnt want to work. Maybe its different for different region's ?
If I send you my default.xex can you maybe have a look? I did try it with and without title updates. Also I have used all your other trainers which have all worked perfectly. Anything special need to be enabled or disabled in the launch.ini ? Maybe you can post a sample of your launch.ini ?

Thanks for the response and the effort...

[optantic]

If the titleid matches then the game should be in the same region.

Where you did get the title update from? I've tried jqe360 and fsd, but couldn't find any title update

There is no special settings in launch.ini, the plugins I have in there are xbdm.xex and the default ftpdll xex

If someone else could confirm it's not working, then I'll try to re-rar and re-up the files

[DGenerateKane]

Doesn't work for me either, same Title ID and no TU. I noticed your values for each address (except one of them) were shorter than I thought they should be, I thought each address had an 8 digit value. Granted I have only used a handlful of trainers but every one I've used previously has been that way.

[optantic]

Doesn't work for me either, same Title ID and no TU. I noticed your values for each address (except one of them) were shorter than I thought they should be, I thought each address had an 8 digit value. Granted I have only used a handlful of trainers but every one I've used previously has been that way.
I don't see anything shorter? post the code you think is shorter

Just checked my codes in my Xbox360 hdd with the ones in the rar, I don't see any difference.
Video uploaded

[DGenerateKane]

I mean, every other trainer I've used has codes like this:

2 C264F488 00001388
2 C264F490 00001388

Whereas yours are shorter, except for part of the infinte health code which also has two more digits after the 8 digit value. I just thought it was weird, I admit I know little to nothing about hacking the 360, the last hacking I did was for the GBA over a decade ago. :/

[optantic]

8bit = 2 digits, 16 bit = 4 digits 32bit = 8 digits
so, that's not a big deal
and the code address never changes in the game, unless your version is different than mine
total 59 files and 3 folders (no SystemUpdate folder) 6.72gb

@Cheatahh, try upload your default.xex and I'll compare it with the one I have

[Vampirexx]

Another great release you rock Optantic!

[eco95]

Another awesome fighting game trainer by optantic!

You've broke the record again! ^_^ Awesome job!!

p.s. It's very weird. I have tried 3 different ways and failed. All of your trainers work perfectly except this one.

#P1 Infinite HP
00 83033B65 F0

#P1 Infinite HP
14 83033B50 3F800000 01

#P1 Infinite HP
14 83033B50 3F800000 01
00 83033B65 F0

I've checked the xex with abgx360. Here is the info:

Title ID: 544307D1 (TC-2001)

XEX CRC = 048BF769
XEX Media ID: D0C99160B1D8A9026B6FF232-2A21D923

Region Code: 0x0000FD00
NTSC/J (Excludes China)

I uploaded my DOA4 default.xex . Hope it might help.
http://www.mediafire.com/?39tz8865lf9g1ie

[Cheatahh]

Heres an upload of the default.xex

http://www.fileserve.com/file/xq3sDBH/DOA4defaultxex.rar

[macelosnp]

Is there any special way to run this trainer?. I start the game and I use the back button- get cheats enabled but still take damage and p2 still has full health. Tried in story , versus and survival.
Was really hoping to use this in survival.
Any TU's required ? or anything else? Im willing to try anything...
Maybe someone else can confirm its working ?

i have the same problem
doesn't worked with me

thank you very much optantic

[optantic]

Region Code: 0x0000FD00
NTSC/J (Excludes China)


Wow, this is a FIRST, it works for me (see video) but not everyone else, lol
I thought it should be NTSC/U not J or PAL
Thanks for the default.xex files guys, I'll check my default.xex with those in a few...

update:
eco95, my default.xex is definitely not the same size as yours, mine is 15.7 MB (16,465,920 bytes), Dead or Alive 4 PAL
NTSC/U Media ID 606FFE2A 544307D1 (TC-2001), no TitleUpdate available.

yours is 15.6 MB (16,367,616 bytes) Media ID 2A21D923 544307D1 (TC-2001), shows Region/J when checked for TitleUpdate on xbuc
Media ID 2A21D923
DOA4 TU 1
NTSC/J
15. Jan 10 00:37
1 MB

could be my version is NTSC/U&PAL and everyone else's version is NTSC/J

If someone could upload a Memory Dump, I could port the codes.

1. Download RtCod 1.0 and 1.14 (made by Dwack) if you're on Dash 14699 or lower
1.0:
http://www.mediafire.com/?zm5vkzv7slj7p9b
1.14:
http://www.mediafire.com/?bwb4uh2784z60k9
2. on 1.0 , extract only the JTAG_IP.txt and RTCoD_Final.exe file to your pc and ignore all other files
3. Turn on Xbox360, grab the IP and save it into the JTAG_IP.txt file
4. on 1.4 , extract RTCoD_DLL.xex and RTCoD_SP_Launcher.xex and copy it to your Xbox360 hdd Dead or Alive 4 game folder
5. run RTCoD_SP_Launcher.xex with Xexmenu and the game should start after 5 seconds
6. on the pc, run RTCoD_Final.exe and click Connect, you should see a msg on TV saying Connected
7. Start the game in Story Mode or Survival or VS or Time Attack
8. on the pc RTCoD, click Tools> Dump Game Memory>default.xex at the begging of the Round, should get a confirmation msg after a few seconds
9. exit the game and goto the Dead or Alive 4 game folder and look for a file that looks like default.xex_4-29-2012_19_4_50.bin , transfer it to your pc then upload it

[DGenerateKane]

I get kicked back to the dash after launching RTCoD_SP_Launcher.xex. I also seem to have a different version than both of you, don't know what you use to find out but I used abgx and it reports

XEX Media ID: D35CA3715E9C7357D662964C-2AD7FA3A

Region Code: 0x00FF00FF
PAL
NTSC/U

[optantic]

I get kicked back to the dash after launching RTCoD_SP_Launcher.xex. I also seem to have a different version than both of you, don't know what you use to find out but I used abgx and it reports

XEX Media ID: D35CA3715E9C7357D662964C-2AD7FA3A

Region Code: 0x00FF00FF
PAL
NTSC/U
Yeah, I noticed there are 2 Ntsc/u version at abgx360. My version is the other Ntsc/u
You could check the default.xex Media ID with 360 Content Manager or the abgx360 software, tick Disable Write before click on Launch

Have you tried install the latest Dashlaunch 2.32? And RtCod is not compatiable with Dashboard newer than 14699

[DGenerateKane]

I'm using DL 2.32 and am on 14699.

[optantic]

I'm using DL 2.32 and am on 14699.

then the only reasons it got kicked back to Dashboard are:
1. it can't find all the necessary files (default.xex, RTCoD_DLL.xex, Sp launcher.xex)
2. there's a conflict with the plugins in launch.ini (try remove all plugins if there's any)

[macelosnp]

i tried dump the memory, but RTCOD doesn't connect on my xbox
strange, these days behind I dumped the memory of several games lol

the windows has encountered an error and cannot continue

RTCoD_SP_Launcher.xex launch fine

[DGenerateKane]

All files are there, and the only plugin was xppdll.xex which I deleted but it still kicks me back to the dash.

[optantic]

too many problems with this game lol
try launch the exe again and see

[eco95]

eco95, my default.xex is definitely not the same size as yours, mine is 15.7 MB (16,465,920 bytes), Dead or Alive 4 PAL NTSC/U Media ID 606FFE2A 544307D1 (TC-2001)

yours is 15.6 MB (16,367,616 bytes) Media ID 2A21D923 544307D1 (TC-2001)


9. exit the game and goto the Dead or Alive 4 game folder and look for a file that looks like default.xex_4-29-2012_19_4_50.bin , transfer it to your pc then upload it


Thank you so much again optantic for helping and teaching us how to make dump!
It's my first attemp. I followed your detailed tutorial and here is the dump.

http://www.mediafire.com/?iz6mkos6fq08lb1

Thank you for helping and porting! ^_^

[DGenerateKane]

I've tried it a dozen times between xexmenu and fsd's file manager.

[optantic]

Thank you so much again optantic for helping and teaching us how to make dump!
It's my first attemp. I followed your detailed tutorial and here is the dump.
Thank you for helping and porting! ^_^

Thanks for the dump eco, I'll take a look.

@DGenerateKane, not sure what causes the problem then :)

Someone test these? Media ID 2A21D923
#P1 Infinite HP
14 830EDC38 3F800000 01
01 830EDC4C 012C

#P2 Starts with 1 HP
13 830EDCE8 012C 01
01 830EDCE8 0001
12 830EDCE9 F0 01
00 830EDCE9 01

[eco95]

Thanks for the dump eco, I'll take a look.

@DGenerateKane, not sure what causes the problem then :)

Someone test these? Media ID 2A21D923
#P1 Infinite HP
14 830EDC38 3F800000 01
01 830EDC4C 012C

#P2 Starts with 1 HP
13 830EDCE8 012C 01
01 830EDCE8 0001
12 830EDCE9 F0 01
00 830EDCE9 01

Thank you so much again, optantic! ^_^

I am currently at work now. I will test it for sure as soon as I get off from work.

I will report back in 6 hours.

[optantic]

Thank you so much again, optantic! ^_^

I am currently at work now. I will test it for sure as soon as I get off from work.

I will report back in 6 hours.

Cool. Let me know if P1's HP display looks OK in Vs. Mode or not since value in other Modes is larger when compared to Vs. Mode, and I used the larger value for it.

[Cheatahh]

Im also at work so can only post information in about 8 hours. Hope we get some confirmation before that :-)

[thegutta]

Awesome trainer optantic keep up the grear work thanks bro.

[rez200x]

Hi optantic, which version from abgx.net do you exectly have ? i have tried already Dead_Or_Alive_4_PAL_INTERNAL_XBOX360-RoME &
Dead.Or.Alive.4.NTSC.XBOX360.PROPER-SELECT and all these versions has same Media ID:2AD7FA3A which not working with this trainer. I will try to do backup of my original PAL DoA4 and see which id it has..

[macelosnp]

Someone test these? Media ID 2A21D923
#P1 Infinite HP
14 830EDC38 3F800000 01
01 830EDC4C 012C

#P2 Starts with 1 HP
13 830EDCE8 012C 01
01 830EDCE8 0001
12 830EDCE9 F0 01
00 830EDCE9 01

did not work with my game
thanks

[eco95]

Thanks for the dump eco, I'll take a look.
Someone test these? Media ID 2A21D923


I just tested it. With or without TU1. It's so weird. It's not working, either.
#P1 Infinite HP
14 830EDC38 3F800000 01
01 830EDC4C 012C
or
#P1 Infinite HP
01 830EDC4C 012C

Please help if possible~ ^_^ Thank you so much~~

[optantic]

Hi optantic, which version from abgx.net do you exectly have ? i have tried already Dead_Or_Alive_4_PAL_INTERNAL_XBOX360-RoME &
Dead.Or.Alive.4.NTSC.XBOX360.PROPER-SELECT and all these versions has same Media ID:2AD7FA3A which not working with this trainer. I will try to do backup of my original PAL DoA4 and see which id it has..

I got mine from googling and it's already ripped, But, there are 3 versions of the game out there, all with the same Title ID but different Media ID, 2 are NTSC/U_PAL with different media id (the one I got is 606FFE2A and the one you have is 2AD7FA3A) and 1 is NTSC/J with Media ID 2A21D923
If you could get a Memory Dump of your game, http://www.360haven.com/forums/showthread.php?13220-Dead-or-Alive-4-NTSC-U-PAL-Media-ID-606FFE2A-2-Trainer&p=98852&viewfull=1#post98852
then I could port the code to match your game.

Sorry about the codes not working , guys! It's probably too late at night and I overlooked :)

Someone test these? Media ID 2A21D923 NTSC/J
#P1 Infinite HP
14 83020198 3F800000 01
01 830201AC 012C

#P2 Starts with 1 HP
13 83020248 012C 01
01 83020248 0001
12 83020249 F0 01
00 83020249 01

[macelosnp]

Sorry about the codes not working , guys! It's probably too late at night and I overlooked :)

Someone test these? Media ID 2A21D923 NTSC/J
#P1 Infinite HP
14 83020198 3F800000 01
01 830201AC 012C

#P2 Starts with 1 HP
13 83020248 012C 01
01 83020248 0001
12 83020249 F0 01
00 83020249 01

Wooow, now works very fine !
Thank you very much for your hard work

:thumbsup:

[optantic]

Glad to hear that, macelosnp. Thanks for the confirmation :)

[eco95]

#P1 Infinite HP
14 83020198 3F800000 01
01 830201AC 012C

#P2 Starts with 1 HP
13 83020248 012C 01
01 83020248 0001
12 83020249 F0 01
00 83020249 01

It's working perfectly now!! optantic :)

I can never thank you enough!!

Truly appreciated all your hard work and help!!

^_^ You're the best of the best!!

P.S. P1's HP display looks OK in Vs. Mode!!

[optantic]

Thanks for testing, eco.

For people with the other NTSC/U version, you could replace the default.xex with eco95's post
http://www.360haven.com/forums/showthread.php?13220-Dead-or-Alive-4-NTSC-U-PAL-Media-ID-606FFE2A-NTSC-J-Media-ID-2A21D923-2-Trainer&p=98975&viewfull=1#post98975
and get the new codes working on it.

Thanks blvjmh for the info.

[Cheatahh]

Confirmed working now , Thanks to Eco for posting his default.xex-
Also awesome work as always from optantic bringing one of the most wanted trainers to us.

[Ninja Twin]

Thanks to the OP for the trainer. I have an older Jtag (early last year) and am using XEX launcher to launch the default xex. Once I get in I select survival and start..then hit the back button but nothing happens. Am I doing something wrong here?

This is what I did:

- Downloaded the iso & ripped it with WX360

- Copied over the 544307D1_DeadORAlive4.txt / 544307D1_DeadORAlive4_Back.xex / xppdll.xex files to the same folder as the DOA iso.

- 544307D1_DeadORAlive4.txt values are
#P1 Infinite HP
14 83020198 3F800000 01
01 830201AC 012C

#P2 Starts with 1 HP
13 83020248 012C 01
01 83020248 0001
12 83020249 F0 01
00 83020249 01


Thanks!

[eco95]

Thanks to the OP for the trainer. I have an older Jtag (early last year) and am using XEX launcher to launch the default xex. Once I get in I select survival and start..then hit the back button but nothing happens. Am I doing something wrong here?
Thanks!

Don't run default.xex

Run 544307D1_DeadORAlive4_Back.xex

Then, in game, press [back] button.

It will pop up and say "Cheats Enabled"

[Ninja Twin]

Don't run default.xex

Run 544307D1_DeadORAlive4_Back.xex

Then, in game, press [back] button.

It will pop up and say "Cheats Enabled"

Tried that and it boots me to dash.

Thx

[rez200x]

ya got same problem if i use default.xex_11-22-2005_20_4_38 (renamed to default.xex) and move it to my DoA4 folder and after launch 544307D1_DeadORAlive4_Back.xex , then my xbox return back to dash and says the game is demaged or..

[eco95]

ya got same problem if i use default.xex_11-22-2005_20_4_38 (renamed to default.xex) and move it to my DoA4 folder and after launch 544307D1_DeadORAlive4_Back.xex , then my xbox return back to dash and says the game is demaged or..

Use this default.xex ---> http://www.mediafire.com/?39tz8865lf9g1ie


Don't use default.xex_11-22-2005_20_4_38, that's memory dump.

[Ninja Twin]

Use this default.xex ---> http://www.mediafire.com/?39tz8865lf9g1ie
.

I have the US/PAL version & used the above default.xex. It loads fine with the default xex but no cheats activated. If I run the back.xex.. it boots me to dash.

[eco95]

I have the US/PAL version & used the above default.xex. It loads fine with the default xex but no cheats activated. If I run the back.xex.. it boots me to dash.


Regarding to exit and boot to dash....

1. make sure you've installed Dashlaunch 2.32

2. remove any plugin from launch.ini

[Ninja Twin]

Regarding to exit and boot to dash....

1. make sure you've installed Dashlaunch 2.32

2. remove any plugin from launch.ini

I'm using an older Jtag dash from Jan 2011 (NXE).

[eco95]

I'm using an older Jtag dash from Jan 2011 (NXE).


I think after installing Dashlaunch 2.32, your problem will be solved!

[longy999]

Awesome work, can't wait to use my new found immortality on that annoying Alpha-152 boss!

[ChuChox]

Thanks !! I wanted this one for long time...!!!
I use Ascension to froze cpu, but this is much better, hey optantic i found this address 0x8341DAAB (.byte) default is 3, poke to another hex number and it give u all items in survival mode and this one 0x830A52A0 (float) do a turbo mode.

[Ninja Twin]

I think after installing Dashlaunch 2.32, your problem will be solved!

Thanks. Just got my Jtag updated to the latest dash so hopefully it works. I really appreciate your assistance.

Update: Worked great and got my Survival/Survival Tag achievs.
If anyone is after these achievs play till you have 50 wins, disable cheats and die. Do the same for 80 as sometimes only the 100 wins pops without these. Also this will make the wins look 100% legit.

[maxretter]

possible to put these kind of mods onto a standard save as i need survival achieve and no jtag -_-

[Ninja Twin]

Would love to see some Jtag mods like this one for Rainbow Six 1 Realistic & Devil May Cry 4 Bloody Palace.

Awesome work on this one OP !!!

[Serious_M]

nice job on this trainer optantic

[CloudStrife7x]

fantastic work on this trainer optantic :)

[Nerg]

Works great. Thanks

[robertmufc]

anyone got a link to the default xex the link is down!

[nebursaga]

thanks, very useful, great post.

[AZRAILARCH]

New to this site. Just started the Dead or Alive Game series as not a very good beat um up player, have to use action replay to do tekken games on ps2 / ps1. This is why I like Dead or Alive, its easy to do but completely unable to play DOA 4 on 360. Found this post onm google search for a trainer for p1 infinite health but that it. How and where do a download the trainer and how to use it. Do I need to mod my 360 or anything.
UK console and DOA 4 pal version. would the trainer work on that or do I need to get a NTSC version ? Thanks for any help.

[DavidAguil]

:ninja::ninja::ninja::ninja::ninja:super gracias funsiona pal sin actualisar yupi

[skandyany]

Where download on "Media ID 2A21D923" ???

[kuwabara31]

After so try it succeeds, if it works only must delete all # of the text file and copy the folder where the game is the default.exe and enable or disable the back button.

1. Extract the files in the rar
2. open 544307D1_DeadORAlive4.txt and remove all the # in front of the code(s) you want to use
3. Put XPPDLL.xex 544307D1_DeadORAlive4.txt and 544307D1_DeadORAlive4_Back.xex into the Jtag ripped Dead or ALive 4 game folder where default.xex is
4. Run 544307D1_DeadORAlive4_Back.xex using XexMenu or other tools
5. Press the Back Button to Enable/Disable cheats

[vicicarus]

Did anyone get this working on Media ID: 2AD7FA3A? None of the links for this ID in the thread are working.

[eadmaster]

Did anyone get this working on Media ID: 2AD7FA3A? None of the links for this ID in the thread are working.

EDIT: just got it working on Media ID 2AD7FA3A: you just have to enable the second code set in the txt file like this (no need to download any extra default.xex):

#DEAD OR ALIVE 4 [544307D1] by optantic

#NTSC/U_PAL Media ID 606FFE2A
#P1 Infinite HP
#14 83033B50 3F800000 01
#00 83033B65 F0

#P2(CPU) Starts with 1 HP
#13 83033C00 012C 01
#01 83033C00 0001
#12 83033C01 F0 01
#00 83033C01 01

#NTSC/J Media ID 2A21D923
#P1 Infinite HP
14 83020198 3F800000 01
01 830201AC 012C

[Xander3697]

Very awesome trainer! Thanks!


Dead or Alive 4 +2 Trainer NTSC/U&PAL [544307D1] Media ID 606FFE2A by optantic

Trainer features:
P1 Infinite HP
P2(CPU) Starts with 1 HP

Instruction:
Run it like all other trainers or read the readme.txt

Note: Check your default.xex Media ID with the abgx360 or 360 Content Manager software

Version 2: Added codes for NTSC/J Media ID 2A21D923
http://www.mediafire.com/?q474a3dyyld72ry

If your default.xex Media ID is 2AD7FA3A, you could replace it with this default.xex, Media ID 2A21D923, provided by eco95.
http://www.mediafire.com/?39tz8865lf9g1ie



http://www.youtube.com/watch?v=jIi8fpy5fTI