Log in

View Full Version : [Release] [PS3/XB360]Dark Souls II Save Editor V2.0.0.5



Pages : 1 2 [3] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Bruster
06-05-2014, 01:36 AM
He's talking about the MegaMule save for PS3 It starts with 0:00 ingame time and all warps before Character creation. So that could be the reason it's not working. Could be wrong though.

darkaxis28
06-05-2014, 02:04 AM
He's talking about the MegaMule save for PS3 It starts with 0:00 ingame time and all warps before Character creation. So that could be the reason it's not working. Could be wrong though.

You'd be correct on the save but I doubt that's the reason. I have another save with roughly 30 seconds in each besides the first which had over a minute and a half. Only the first two slots showed up in the SE. There must be another reason.

deathcraft
06-05-2014, 02:49 AM
I have modded my save everything was working fine until the latest calibration update. Now when ever I save & quit, my game save gets corrupt has this happen to anyone else?

ReDeMpTiOn213
06-05-2014, 03:02 AM
I have modded my save everything was working fine until the latest calibration update. Now when ever I save & quit, my game save gets corrupt has this happen to anyone else?



Updated: I found a way to kinda fix/get passed this. I created a brand new save and inject all of my back up data into the new save. It retrieves the calibrations and still loads up. Not tested thoroughly but it did work with back to back saves and quits and a system shutdown. It downloads the calibrations and loads up again after each shutdown I did. I did play around and used some items up and killed the enemies at the start. And redid the save/quit + shutdown and it did work. Also did the same when I warped to Majula. Hopefully this will help some people if they were effected like I was because I lost my save which I was pretty far into and had to go back a ways back with my back up. Thank god for the back up thou so I am not complaining. Thank you Jappi

This is what i did to fix this problem.

Note: i had to use a back up of my save i made that was untouched by new calibrations for this to work. And i have alerted Jappi. There should be a fix in the future :)

liujun
06-05-2014, 03:04 AM
can author add function to mod stamina please

ReDeMpTiOn213
06-05-2014, 03:05 PM
Hey Jappi,

Is the new calibrations update causing my save to become corrupt when I use your save editor?

Merkinz666
06-05-2014, 03:53 PM
I can't manage to download it, the download page just sends me to http://ww90.tppunknown.com/ is there a mediafire or something?

stxnzy
06-06-2014, 11:02 AM
Same problem, link is down. Sends you to an open domain. (http://ww90.tppunknown.com/)
I'd really like to use your save editor, so maybe upload the file to mediafire or atleast reupload it? Thanks.

taelsien
06-06-2014, 08:11 PM
Can't download! ((( file not exists

shura30
06-07-2014, 11:52 AM
i think covenant management needs to be revisited
not only i don't get increased aura (blue sentinels and bob) but it seems it won't allow me any other modifications to other characters without the game freezing at the 'downloading latest calibrations' or right after loading any character

dutitipuff
06-07-2014, 01:13 PM
Can't download editor(, am i the only one?

bigboys
06-07-2014, 02:00 PM
download offline, =/

who101
06-07-2014, 05:05 PM
Thanks this is pretty awsome

Cryyowolf
06-07-2014, 05:22 PM
Download is not working sends mwe to some random page

DOOMracoon
06-07-2014, 05:22 PM
Yep, can't download either.

blockhead
06-08-2014, 01:34 AM
same, trying to download but I get sent to some random page that I do not trust

ashuraman
06-08-2014, 08:59 AM
today's new DB updating is something wrong.
can't load save data, buffer error notice pop.

Jappi88
06-08-2014, 10:44 AM
ChangeLog 1.0.1.0

*Fixed Covenants Ranking
*Fixed Parameter file not loading with the latest DSII Update
*Added Drag and Drop for PS3 and XBOX360 Saves
*Changed Gesture Selection into something more pleasant
*Changed Equipment Selection into something more pleasant
*Drawing Extra image on the equipment item chooser to show whether item is equiped or not
*Optimized code for better performance and less errors
*Added Warnings to make sure that not too many items of the same kind get added, to prevent the game from acting weard
*And More!

pogi
06-08-2014, 10:50 AM
hello jappi thanks for the update but when i try to open the save the whole editor just close it self with no error poping out .....

Jappi88
06-08-2014, 11:00 AM
hello jappi thanks for the update but when i try to open the save the whole editor just close it self with no error poping out .....

There is no such thing...loaded up the saves without any isseus...
did the tool update to version 1.0.1.0?

if you cant load your save, send me your save and il look into it.

ReDeMpTiOn213
06-08-2014, 02:02 PM
Thank you Jappi!!! I been waiting on this. I can finally use the editor again and help people when they need help with their saves. Your the best! :D

Heol
06-08-2014, 02:04 PM
does this work for PC version like you did with ds1? i used to many bonfire ascetic and the game become harder. can i reset it using this? thank you.

ReDeMpTiOn213
06-08-2014, 02:23 PM
Jappi or too anyone who knows how to answer this correctly. What are the items under the DataBase tab that are in the trash can? Can you use these items or do they mess up your save?

ceioptions
06-08-2014, 02:51 PM
does this work for PC version like you did with ds1? i used to many bonfire ascetic and the game become harder. can i reset it using this? thank you.

not yet only console versions like you I still checking and waiting...

Jappi88
06-08-2014, 04:29 PM
Jappi or too anyone who knows how to answer this correctly. What are the items under the DataBase tab that are in the trash can? Can you use these items or do they mess up your save?

Those are items that are not used ingame or may not be added/edited or items you want to exclude from editing.
you can drag them out if you want to be able to add/see/edited those or drag items into it to disable it from editing.

venomor
06-08-2014, 04:52 PM
Did you figured out what was wrong with my saves? :033: I haven't tested the new update yet :049:

Jappi88
06-08-2014, 05:09 PM
Did you figured out what was wrong with my saves? :033: I haven't tested the new update yet :049:


i have no cleu, you send me 2 corrupted saves , i need atleast 1 working save.

Edit : May have been fault

ReDeMpTiOn213
06-08-2014, 05:27 PM
Hey Jappi every time I load up my save or even extract it my save instantly gets corrupted. Even the back ups I make are corrupted. I have to make a new save a reinsert everything using the tool tab. This happens even when I use party buffalo and the USB reader in your editor. You have any ideas on what is going on? Could it be my thumb drive? Idk

P.s. Only saves I have are all corrupted even my back ups I made. I would have to totally remake the save if you want a working one. But I have plenty corrupted ones hahaha

Thanks for all your hard work. I appreciate it :)

Jappi88
06-08-2014, 05:53 PM
Hey Jappi every time I load up my save or even extract it my save instantly gets corrupted. Even the back ups I make are corrupted. I have to make a new save a reinsert everything using the tool tab. This happens even when I use party buffalo and the USB reader in your editor. You have any ideas on what is going on? Could it be my thumb drive? Idk

P.s. Only saves I have are all corrupted even my back ups I made. I would have to totally remake the save if you want a working one. But I have plenty corrupted ones hahaha

Thanks for all your hard work. I appreciate it :)

have you tried extracting/replacing your save with horizon and also without using my tool ?

ReDeMpTiOn213
06-08-2014, 06:18 PM
have you tried extracting/replacing your save with horizon and also without using my tool ?

I have stopped using horizon because with both dark souls 1 and 2 it shrinks the size if the save and gives me errors down the line when I try to mod it again. I can give you a copy of my save that I newly created because my back ups failed. But what I have started doing is extract it with your USB loader and load the sAve from my PC and then mod. After that I load the USB and click replace the save from my laptop and then has worked twice or few more times.

shura30
06-08-2014, 07:06 PM
Hey Jappi every time I load up my save or even extract it my save instantly gets corrupted. Even the back ups I make are corrupted. I have to make a new save a reinsert everything using the tool tab. This happens even when I use party buffalo and the USB reader in your editor. You have any ideas on what is going on? Could it be my thumb drive? Idk

P.s. Only saves I have are all corrupted even my back ups I made. I would have to totally remake the save if you want a working one. But I have plenty corrupted ones hahaha

Thanks for all your hard work. I appreciate it :)


I think you might have the same issue as mine
I've already sent a save to jappi88

Question: Is it possible that some item we equipped are stuck?
There was an issue with previous versions where items would not stick permanently to the assigned slot
It should have been fixed with 1.08 (first item in the change log) maybe some character are still left with some of them

ReDeMpTiOn213
06-08-2014, 08:20 PM
I think you might have the same issue as mine
I've already sent a save to jappi88

Question: Is it possible that some item we equipped are stuck?
There was an issue with previous versions where items would not stick permanently to the assigned slot
It should have been fixed with 1.08 (first item in the change log) maybe some character are still left with some of them

I only had problems whenever the newest calibrations came out. The only fix I have came up with is just create a brand new eve and inject your progress,build,stats, and inventory into the new save. I use the USB loader in the editor to extract the save and load the save from my PC. Edit it and the use the USB loader to replace the save and it normally loads up

venomor
06-08-2014, 09:08 PM
i have no cleu, you send me 2 corrupted saves , i need atleast 1 working save.

Edit : May have been fault
Both corrupted?! :075: The backup too?! :075:

Vis
06-08-2014, 10:39 PM
I'm getting the same fail to save error message. I can play the game perfectly if I delete the updates to the game, but with the latest version I get that error. After loading a character, it'll proceed into the game as usual, but when the game tries to auto save it fails and returns to the main menu. I've tried the suggestions to get around it to no avail.
:009:

Also, as a sidenote, the Desert Sorceress Top is in the wrong section in the database. It's in the arm equipment category instead of the chest. I know we can edit the database ourselves, but I thought I'd let you know.

shura30
06-08-2014, 10:52 PM
I only had problems whenever the newest calibrations came out. The only fix I have came up with is just create a brand new eve and inject your progress,build,stats, and inventory into the new save. I use the USB loader in the editor to extract the save and load the save from my PC. Edit it and the use the USB loader to replace the save and it normally loads up


I have 4 characters how do you suggest to proceed to create a new save and copy each one of them?
Di I need to create 4 dummies to be replaced afterwards?

Jappi have you tried my save?

ReDeMpTiOn213
06-08-2014, 11:16 PM
I have 4 characters how do you suggest to proceed to create a new save and copy each one of them?
Di I need to create 4 dummies to be replaced afterwards?

Jappi have you tried my save?



Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

DOOMracoon
06-09-2014, 12:03 AM
Thanks again for this great tool!

Shmooey
06-09-2014, 03:18 AM
This thing worked great for awhile but now whenever I edit anything the game freezes when saving content thing comes up at the title screen

pcweekly
06-09-2014, 03:29 AM
Hi Jappi,

For PS3 version...

while removing magic from the equipment interface, the same error box, "System.NullReferenceException" is still appeared...

Souperintendent
06-09-2014, 11:06 AM
It's been working great for me, but now when I try to load the save on my 360 it tells me it's corrupted. I noticed that when I try to Rehash and Resign the file in Horizon, it says "FATX: File byte offset to physical byte offset failed during non-cached synchronous I/O (0xC0000102)"

What's happened?

I've tried some backups too, and it all gets the same thing. Different flash drives have been tested as well.

ReDeMpTiOn213
06-09-2014, 01:56 PM
It's been working great for me, but now when I try to load the save on my 360 it tells me it's corrupted. I noticed that when I try to Rehash and Resign the file in Horizon, it says "FATX: File byte offset to physical byte offset failed during non-cached synchronous I/O (0xC0000102)"

What's happened?

I've tried some backups too, and it all gets the same thing. Different flash drives have been tested as well.

If you read there is a solution that has be working for me. Doesn't have to be four. Create how many characters you need to replace. Like if you scroll up and read the one person need four replaced, which this little wall through is based off of.


Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

Hey Jappi,
There will be a new calibrations update and a new game update. I don't know if it will affect your editor but I am giving you a heads up :)

Update version 1.05 planned for Monday 6/16

Dark souls 2 is planned to be updated shortly. This update is meant to improve user experience.

Issues fixed in new update:
1) fixes issue which allows users to dash at high speed.
2) fixes issue which allows users to float in the air.

Schedule:
Planned Monday 6/16

Regulation version update:
*1.06* to *1.07*
(The game contents will not be changed. Only the issues above are addressed.)

Game version update:
*1.04* to *1.05*

MadLancer
06-09-2014, 06:11 PM
I primarily use save editors so I can get a character to the meta pvp level (SL 125 for DkS1, SL 150 for DkS2) and I decided to check this one out, because it got good reviews. Along my way, I've encountered two significant things.
1st Issue I've found:
The Playthrough # doesn't work as intended. While it does put me in PvE NG+, I was only able to co-op and pvp with people in NG (I lowered my SL and SM so that I could see summons in the forest of fallen giants, and I got invaded by a low-level player.)
2nd Issue:
Slightly relating to the first issue. So I went through and killed Nashandra(The Giant's Kinship you get doesn't actually work until you kill the Giant Lord, btw) and went to a proper NG+ with a different character. Now, I can't see any summon signs at all, and I'm unable to invade. I've yet to be invaded, as well. I'm not sure if it has to do with me or the editor, but I'm just reorting it to be seen.

Please reply soon, as I am currently suffering without PvP

Souperintendent
06-09-2014, 06:40 PM
If you read there is a solution that has be working for me. Doesn't have to be four. Create how many characters you need to replace. Like if you scroll up and read the one person need four replaced, which this little wall through is based off of.
I was thinking about doing something like that, but wouldn't I lose my progress? Not my stats, but my progress through the game?

ReDeMpTiOn213
06-09-2014, 06:41 PM
I was thinking about doing something like that, but wouldn't I lose my progress? Not my stats, but my progress through the game?

You extract your progress,build, stats, and inventory using the tool tab within the save editor and load the new save in and go to tool tab and replace each one with the ones you just extracted.

Souperintendent
06-09-2014, 07:42 PM
You extract your progress,build, stats, and inventory using the tool tab within the save editor and load the new save in and go to tool tab and replace each one with the ones you just extracted.

All right, it seems to work, but every time I equip/unequip something it says "Failed to save game" and kicks me to the main menu. Was I supposed to go to the house and create the character first, or just save/quit as soon as I have control?

ReDeMpTiOn213
06-09-2014, 08:38 PM
All right, it seems to work, but every time I equip/unequip something it says "Failed to save game" and kicks me to the main menu. Was I supposed to go to the house and create the character first, or just save/quit as soon as I have control?


I just save and quit as soon as I got there. If you are still having problems let me know and I will have you upload your save and I will try and help you recover it. But the save will have to be able to be loaded on the editor so I can extract your stuff. But PM me so we don't have a conversation anymore on the thread.

bigboys
06-09-2014, 10:21 PM
very good boy!!

BloodCri
06-10-2014, 01:26 AM
Forgive my idiocy. I'm very new to programs like this. I've been fiddling with it for some time and I've been able to load some PS3 and XBox save files i nabbed to test it out but I've been unable to figure out how to load a PC save game. Or is that not supported?

ReDeMpTiOn213
06-10-2014, 01:29 AM
Forgive my idiocy. I'm very new to programs like this. I've been fiddling with it for some time and I've been able to load some PS3 and XBox save files i nabbed to test it out but I've been unable to figure out how to load a PC save game. Or is that not supported?

Sorry mate. PC won't be support for a bit I am afraid.

ajacobik
06-10-2014, 04:00 AM
So, here's my problem: I've loaded my save off my USB, edited it (nothing crazy at all), and saved it. When I try to load the character, it gets to the prompt that says "Saving content. Please don't turn off your console.", and the game crashes. I've tried extracting the files via Party Buffalo and injecting the new file onto the USB and that doesn't work either. What's going on?

BloodCri
06-10-2014, 05:09 AM
Ah. I see. Thank you. I'll be sure to keep my eye on this for when PC is supported.

Big_Dog
06-10-2014, 10:51 AM
Hi, i wonder if someone can help me, i'm a bit unsure of what save file to actually inject in horizon, is it the .bak file? I have tried injecting this file but when i load my game on 360 nothing has changed, am i doing something wrong? Any help much appreciated.

ReDeMpTiOn213
06-10-2014, 11:39 AM
Hi, i wonder if someone can help me, i'm a bit unsure of what save file to actually inject in horizon, is it the .bak file? I have tried injecting this file but when i load my game on 360 nothing has changed, am i doing something wrong? Any help much appreciated.

Hey try using the built in USB loader within the editor. Horizon has been known to cause issues with the save causing the modded dark souls 2 save to become
Corrupt and no longer able to save. Last time I use horizon for a dark souls save it change the size if the file from 14.06 mb to 8.96 mb which cause a problem when you try to replace it in horizon as well and brought the problems I mentioned above. If you need help I will try and help you.

ajacobik
06-10-2014, 04:22 PM
So, here's my problem: I've loaded my save off my USB, edited it (nothing crazy at all), and saved it. When I try to load the character, it gets to the prompt that says "Saving content. Please don't turn off your console.", and the game crashes. I've tried extracting the files via Party Buffalo and injecting the new file onto the USB and that doesn't work either. What's going on?

Any chance I could get some help with this?

ReDeMpTiOn213
06-10-2014, 05:12 PM
Hey Jappi,
Can you please respond to this. May I have permission to make and add a tutorial video on your editor and include how to fix some errors with the saves?

Jappi88
06-10-2014, 06:44 PM
Hey Jappi,
Can you please respond to this. May I have permission to make and add a tutorial video on your editor and include how to fix some errors with the saves?

Can you wait a lil longer with that? im going to make a update that will fix those isseus, hopefully you will still be intrested in making a video tut for the upcoming update.

ReDeMpTiOn213
06-10-2014, 07:02 PM
Can you wait a lil longer with that? im going to make a update that will fix those isseus, hopefully you will still be intrested in making a video tut for the upcoming update.

Okay. I will wait. I was Just wanting to make a small tut because everyone is having problems it seems haha thanks for the feedback!

Big_Dog
06-10-2014, 10:56 PM
Hi there, thanks for the help earlier. Using the built in USB reader worked. Only the first time though, upon re editing my game now crashes at the loading screen or alternatively loads in offline mode then when i try to reload it it says the save is corrupt any idea why this might be? Thanks

ReDeMpTiOn213
06-10-2014, 10:59 PM
Hi there, thanks for the help earlier. Using the built in USB reader worked. Only the first time though, upon re editing my game now crashes at the loading screen or alternatively loads in offline mode then when i try to reload it it says the save is corrupt any idea why this might be? Thanks


Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

Just ignore the four characters just do what it says with your character

Silplix
06-10-2014, 11:34 PM
Everything worked just fine ! Thank you so much ! Very, very, very nice work. =)

Vis
06-11-2014, 01:27 AM
Can you wait a lil longer with that? im going to make a update that will fix those isseus, hopefully you will still be intrested in making a video tut for the upcoming update.

I can't wait!
Also, I want to thank you for all the hard work you've put into this tool. It's saved me countless hours with making my PVP cosplay characters. I'm going to make a donation, but I want to apologize in advance that I can't give more. Thanks again, and I'm looking forward to being able to use your tool once again!

:093:

deathcraft
06-11-2014, 11:11 AM
Quote Originally Posted by ReDeMpTiOn213 View Post
Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.



Question. If I did this will all my characters look just like the random player you make for extracting all its stats? Or do they stay the same with all the custom facial features?

I have 6 characters I need to recover so do I need to make 6 random character saves?

ReDeMpTiOn213
06-11-2014, 01:45 PM
Question. If I did this will all my characters look just like the random player you make for extracting all its stats? Or do they stay the same with all the custom facial features?

I have 6 characters I need to recover so do I need to make 6 random character saves?

You just create a new save.
Hit create a new character.
When you spawn in and able to access the menu you can save and quit then.
Repeat until you have the allotted amount of characters you need.

P.S. When you go to insert the new save you just created make sure to leave the game at the title screen with the calibrations already downloaded and loaded!!!! Or it will fail again. So what i do is after I create the final character. I save and quit and just leave it at the title screen. When I am done recovering my save. I put it in and click my USB device and it loads up.

P.S.S. When make the new save load it up with the USB loader within the editor. When it loads your save click extract save to your desktop and load the save from your desktop. Reinsert all of your data for each character. Hit save. Close the save. Reopen the save again. Check to see if the inventory is character etc... If it isn't just reinsert the inventory data for that character in again and save. Repeat as needed. When everything is correct and saved load your usb in editor and click replace save. Then your done.

Just remember to set your torch time or you will have no torches and check the play through number and change that if need.

This does work and it works for me and I have helped a few other members with this problem and it has worked for them. If it doesn't work you did something wrong. Let me know if have any problems.

darkaxis28
06-11-2014, 11:57 PM
Does anyone know why I can't see summon signs but I can still see messages and bloodstains? I can't invade either. It never said I was banned from any servers that I saw so I don't know where going on.

ReDeMpTiOn213
06-12-2014, 01:21 AM
Does anyone know why I can't see summon signs but I can still see messages and bloodstains? I can't invade either. It never said I was banned from any servers that I saw so I don't know where going on.

Did you burn a human effigy at the bonfire or die to many times? Because that is the side effect of both. Do you see a white soap stone symbol under the stamina bar that has a red sciggle through it?

bwill12
06-12-2014, 02:07 AM
Thanks for this! I'm having a couple of strange issues:

1. I use Modio to extract my save and then load it into the editor
2. On loading up my save in the game, my equipped items are wonky (sometimes missing armour, sometimes incorrect rings, etc.)
3. My SL150 Swordsman mysteriously gains a level everytime, it seems like the editor wants to change my min. Fth to 6 rather than 5
4. I've tried exporting character/inventory/progress to a brand new save, but it gives an error saving when i load it and dumps me back to the title screen (could this be due to my using Modio)?

Thanks for any help.

darkaxis28
06-12-2014, 02:08 AM
Did you burn a human effigy at the bonfire or die to many times? Because that is the side effect of both. Do you see a white soap stone symbol under the stamina bar that has a red sciggle through it?

Nope, I've traveled to different areas of the game and it the same situation. And no symbol either, it's really weird.

ReDeMpTiOn213
06-12-2014, 02:10 AM
Nope, I've traveled to different areas of the game and it the same situation. And no symbol either, it's really weird.

Have you tried using the bone of order?

ReDeMpTiOn213
06-12-2014, 02:12 AM
Thanks for this! I'm having a couple of strange issues:

1. I use Modio to extract my save and then load it into the editor
2. On loading up my save in the game, my equipped items are wonky (sometimes missing armour, sometimes incorrect rings, etc.)
3. My SL150 Swordsman mysteriously gains a level everytime, it seems like the editor wants to change my min. Fth to 6 rather than 5
4. I've tried exporting character/inventory/progress to a brand new save, but it gives an error saving when i load it and dumps me back to the title screen (could this be due to my using Modio)?

Thanks for any help.

Have you tried using the USB loader in the editor? And have you try to load the save after the calibrations have been loaded?

darkaxis28
06-12-2014, 02:57 AM
Have you tried using the bone of order?

I have not, one sec.

ReDeMpTiOn213
06-12-2014, 03:04 AM
I have not, one sec.

have you entered the Company of Champions, which one of the perks of this covenant is restricting summoning to increase difficulty. You can leave the covenant at any time by talking to the Cat, Sweet Shalquoir in Majula .

Are you human? You must be 100% human to see signs.

Did you burn a Human Effigy in a bonfire? This puts you into "offline mode" for an hour so you you can be human and not invaded.

Do you have Name-Engraved Ring equipped? This will prohibit you from seeing any signs but those with that ring equipped (even NPC phantoms)

After you place your summon sign and the summon fails (usually bad connection or the host already has enough players), the White Sign Soapstone becomes unusable. To fix this glitch, quit the game and continue.

Is the area boss alive? If the area boss is dead you will only be able to see Small Soap Stone signs.

¤There are certain areas that you cannot place a summon sign or summon other players. One example is in Hedie's Tower of Flame, after the second bonfire, you go into an area inside the tower, and can not place your sign nor summon other players.

darkaxis28
06-12-2014, 03:04 AM
It says I cannot use it at this time. I must be on a ban server or something, this doesn't make sense at all.

ReDeMpTiOn213
06-12-2014, 03:08 AM
It says I cannot use it at this time. I must be on a ban server or something, this doesn't make sense at all.

If your still having problems even after reading my previous post go to this website and you message support. Details included.
http://support.bandainamcogames.com/index.php?/Knowledgebase/Article/View/425/0/dark-souls-ii---why-is-my-account-blockedbanned-from-using-the-dark-souls-ii-servers

darkaxis28
06-12-2014, 03:08 AM
have you entered the Company of Champions, which one of the perks of this covenant is restricting summoning to increase difficulty. You can leave the covenant at any time by talking to the Cat, Sweet Shalquoir in Majula .

Are you human? You must be 100% human to see signs.

Did you burn a Human Effigy in a bonfire? This puts you into "offline mode" for an hour so you you can be human and not invaded.

Do you have Name-Engraved Ring equipped? This will prohibit you from seeing any signs but those with that ring equipped (even NPC phantoms)

After you place your summon sign and the summon fails (usually bad connection or the host already has enough players), the White Sign Soapstone becomes unusable. To fix this glitch, quit the game and continue.

Is the area boss alive? If the area boss is dead you will only be able to see Small Soap Stone signs.

¤There are certain areas that you cannot place a summon sign or summon other players. One example is in Hedie's Tower of Flame, after the second bonfire, you go into an area inside the tower, and can not place your sign nor summon other players.

Nope, I'm good in each one of those categories.

ReDeMpTiOn213
06-12-2014, 03:11 AM
Nope, I'm good in each one of those categories.
then read the post above this one and follow the link. You can email support and ask them.

gabrielegamers
06-12-2014, 04:20 PM
Jappi, why if i make build the game say me that it can't load the save of the saveditor?
i use x99 for all the inventory object that you can farm in the game...
if i make the first build the save is ok, but if i make another build the game , during the storyline say that it can't save.
please help! :/

Keelan8981
06-13-2014, 10:15 AM
the download link is broken? or has it been moved to another location anyone with information please message me. thanks

bwill12
06-13-2014, 12:22 PM
Have you tried using the USB loader in the editor? And have you try to load the save after the calibrations have been loaded?

Yes, I've tried both suggestions with the same results. I've also noticed that editing the save alters my soul memory, reducing it from 22 million to around 9 million.

ReDeMpTiOn213
06-13-2014, 01:12 PM
Yes, I've tried both suggestions with the same results. I've also noticed that editing the save alters my soul memory, reducing it from 22 million to around 9 million.

What is the size of your save. Like how many Mb is it? A normal dark souls 2 save should be 14.06 Mb I think or very close to it. You may just have to wait til the new update for the editor which will hopefully be coming out soon. I have never heard of it changing stuff by itself , but it's still in beta so I wouldn't doubt it. What are you trying to do exactly to your save?

bwill12
06-13-2014, 02:52 PM
What is the size of your save. Like how many Mb is it? A normal dark souls 2 save should be 14.06 Mb I think or very close to it.

Yup, it's 14.0 MB (14,741,504 bytes).


What are you trying to do exactly to your save?

I'm only adding some items to my inventory, mainly consumables and twinkling. Not messing with stats or anything else. I'll hold off until the next update and see if it is still occurring. Thanks for your help.

ReDeMpTiOn213
06-13-2014, 02:55 PM
Yup, it's 14.0 MB (14,741,504 bytes).



I'm only adding some items to my inventory, mainly consumables and twinkling. Not messing with stats or anything else. I'll hold off until the next update and see if it is still occurring. Thanks for your help.

How many items are you trying to add and is it to your item box? Because I know when you add to many to your inventory it has a chance of messing up. I would recommend doing like 15-20 items at a time and adding them to you item box at x99 an see if it loads up correct. Then if it does then you add 15-20 more at x99 and check. When all is there you can change it all to x9999 in your item box.

Learning
06-14-2014, 02:44 PM
I briefly looked over the previous comments so not sure if it was said yet, but I also too am having an issue modding now. I was able to fine before but now no matter how small the value, it will freeze on me after calibrations when it is saving. I am not adding a crazy amount of anything. Simply made a x1 into a x10. I can manually edit the save but finding the values for everything takes a while

ReDeMpTiOn213
06-14-2014, 02:47 PM
I briefly looked over the previous comments so not sure if it was said yet, but I also too am having an issue modding now. I was able to fine before but now no matter how small the value, it will freeze on me after calibrations when it is saving. I am not adding a crazy amount of anything. Simply made a x1 into a x10. I can manually edit the save but finding the values for everything takes a while

Have you tried loading it after calibrations has been downloading. For example load the game up to character select, back to where it says new game, etc.. And pull out your USB. Mod it and then put it back in. It bypasses the calibrations download because it was already downloaded. And it should work.

Learning
06-14-2014, 03:09 PM
Have you tried loading it after calibrations has been downloading. For example load the game up to character select, back to where it says new game, etc.. And pull out your USB. Mod it and then put it back in. It bypasses the calibrations download because it was already downloaded. And it should work.
The calabrations is not what makes it freeze. Even when I unplug the ethernet, it will still freeze at saving before the game loads


Ok I think I figured it out. The algorithm is off. If you have too may items in your inv, then it will shit out when you try to save. I had 999 of everything and once you pick up one more item of that, it breaks off into x10 99. When I went back and make everything +1 and then changed the value of one thing to x99, it worked

ReDeMpTiOn213
06-14-2014, 03:10 PM
The calabrations is not what makes it freeze. Even when I unplug the ethernet, it will still freeze at saving before the game loads

Then try creating a new save and injecting your data into via tool tab in the editor

Learning
06-14-2014, 03:16 PM
Ok I think I figured it out. The algorithm is off. If you have too may items in your inv, then it will shit out when you try to save. I had 999 of everything and once you pick up one more item of that, it breaks off into x10 99. When I went back and make everything +1 and then changed the value of one thing to x99, it worked

ReDeMpTiOn213
06-14-2014, 03:22 PM
Ok I think I figured it out. The algorithm is off. If you have too may items in your inv, then it will shit out when you try to save. I had 999 of everything and once you pick up one more item of that, it breaks off into x10 99. When I went back and make everything +1 and then changed the value of one thing to x99, it worked

Oh that's why I only add x9999 into my item box so I can just withdraw x99 or how many I need to prevent stuff like this

Sddn
06-14-2014, 09:15 PM
THis worked perfectly, except for now it will not let me go onto my next playthrough. if you have any clue on how to fix this please respond ASAP

suwoop
06-14-2014, 09:16 PM
wont let me download

Sddn
06-14-2014, 09:18 PM
Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

THis worked perfectly thanks, except now it will not let me go onto my next playthrough. any help on how to fix this will be greatly appreciated, please respond ASAP

ReDeMpTiOn213
06-14-2014, 09:19 PM
THis worked perfectly thanks, except now it will not let me go onto my next playthrough. any help on how to fix this will be greatly appreciated, please respond ASAP

Did you insert your progress or actually tell me what exactly is going on?

Sddn
06-14-2014, 09:34 PM
Did you insert your progress or actually tell me what exactly is going on?

so i followed your instructions perfectly, or at least perfectly to my understanding of them seeing as they are a bit confusing. i created a new save, extracted what i wanted from my other save, replaced the new save data with the other save data, saved, and loaded up my game. I'm not getting a corruption message anymore, it just won't let me start my next playthrough

ReDeMpTiOn213
06-14-2014, 09:36 PM
so i followed your instructions perfectly, or at least perfectly to my understanding of them seeing as they are a bit confusing. i created a new save, extracted what i wanted from my other save, replaced the new save data with the other save data, saved, and loaded up my game. I'm not getting a corruption message anymore, it just won't let me start my next playthrough



Do you have all your bonfires open or are they still unlit

Sddn
06-14-2014, 09:39 PM
Do you have all your bonfires open or are they still unlit

all are still open, all bosses have been killed

ReDeMpTiOn213
06-14-2014, 09:43 PM
all are still open, all bosses have been killed

Did you reset what play through you was on with editor? Because there is a scroll bar that you can set your play trough with so try that. Set it to what it was at.

Sddn
06-14-2014, 09:45 PM
Did you reset what play through you was on with editor? Because there is a scroll bar that you can set your play trough with so try that. Set it to what it was at.
i was at playthrough one, and in the editor it was saying playthrough 1 but i'll try moving it around to see what happens

ReDeMpTiOn213
06-14-2014, 09:48 PM
i was at playthrough one, and in the editor it was saying playthrough 1 but i'll try moving it around to see what happens

If you was 100% sure you completed the game and beat nashandra, the final boss lady, you can insert a new progress info into your character and set the play through to 2

Sddn
06-14-2014, 09:49 PM
If you was 100% sure you completed the game and beat nashandra, the final boss lady, you can insert a new progress info into your character and set the play through to 2
alright thanks!

Inotak
06-15-2014, 12:24 AM
My game is freezing. Every time I mod the save, my Xbox freezes when the game tries to write the file. Any idea why this is happening? I've done the same things before and nothing happened.

ReDeMpTiOn213
06-15-2014, 12:26 AM
My game is freezing. Every time I mod the save, my Xbox freezes when the game tries to write the file. Any idea why this is happening? I've done the same things before and nothing happened.

What do you mean by "write the file"? You mean save the save or what.

Inotak
06-15-2014, 12:31 AM
Yes, that's what I meant.

ReDeMpTiOn213
06-15-2014, 12:34 AM
Yes, that's what I meant.

Is it at the title screen, right after the calibrations download? And what have you modded in an the amount you added and was it to your inventory or item box?

Inotak
06-15-2014, 12:37 AM
Is it at the title screen, right after the calibrations download? And what have you modded in an the amount you added and was it to your inventory or item box?

Let me try just adding in one thing and see if that works.

It's at anytime it tries to save the file; both before and after calibrations. And the amount I added was 99 in three different items in my inventory.

ReDeMpTiOn213
06-15-2014, 12:39 AM
Let me try just adding in one thing and see if that works.

It's at anytime it tries to save the file; both before and after calibrations. And the amount I added was 99 in three different items in my inventory.

Try adding it into your item box instead and may I ask which items.

Inotak
06-15-2014, 12:42 AM
Let me try just adding in one thing and see if that works.

It's at anytime it tries to save the file; both before and after calibrations. And the amount I added was 99 in three different items in my inventory.

Okay, I have confirmed that it is when I do any kind of modding that it freezes when it saves.

ReDeMpTiOn213
06-15-2014, 12:44 AM
Okay, I have confirmed that it is when I do any kind of modding that it freezes when it saves.

Okay that is a start. How many characters do you have?

Inotak
06-15-2014, 12:44 AM
Try adding it into your item box instead and may I ask which items.

Cracked Blue Eye Orb, Token of Fidelity, and Soul of a Brave Warrior.

I'll try the item box now.

- - - Updated - - -


Okay that is a start. How many characters do you have?

I have three.

ReDeMpTiOn213
06-15-2014, 12:45 AM
Cracked Blue Eye Orb, Token of Fidelity, and Soul of a Brave Warrior.

I'll try the item box now.

- - - Updated - - -



I have three.

Okay I have a idea if the item box thing doesn't work.

Inotak
06-15-2014, 12:48 AM
Okay I have a idea if the item box thing doesn't work.

As I figured, it did not work.

ReDeMpTiOn213
06-15-2014, 12:52 AM
As I figured, it did not work.


Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.




Okay ignore the four character part but instead of 4 it will be 3 characters since you have 3. Try this and when your done re inserting everything then add the items you want into the characters item box.

P.s. Make sure to load the save after the calibrations have been downloaded. So after download leave it at title screen.

Inotak
06-15-2014, 01:11 AM
Okay ignore the four character part but instead of 4 it will be 3 characters since you have 3. Try this and when your done re inserting everything then add the items you want into the characters item box.

P.s. Make sure to load the save after the calibrations have been downloaded. So after download leave it at title screen.

After I do this, will I be able to mod again or will I have to do this again?

ReDeMpTiOn213
06-15-2014, 01:14 AM
After I do this, will I be able to mod again or will I have to do this again?

Only time I have to do this is when I get a error but usually I don't have to do it if I unplug my USB and mod it after calibrations have been loaded. The next update should fix a bunch of these problems. But hey if you don't overboard your save trying to add a million things at once you should be fine. It really isn't a long process to do once you realize what to do. I have four characters and I can do it all In like 5 minutes tops.

Inotak
06-15-2014, 01:37 AM
It worked! Thank you for the help. Although, I would appreciate it if you answered my question.

ReDeMpTiOn213
06-15-2014, 01:40 AM
It worked! Thank you for the help. Although, I would appreciate it if you answered my question.

Just every time you encounter a error and always make a back up.

DavePA
06-15-2014, 12:34 PM
This Editor looks amazing. Great work. Excited to use it once it is re-uploaded. :)

Jappi88
06-15-2014, 08:01 PM
ChangeLog 1.0.1.1

*Added new STFS Fixer, to allow you to fix your corrupted xbox360 save when updated to latest callebration.
*Fixed Equipment Editor, you can now enjoy the awesome equipment interface for easy management.
*Fixed allot of bugs in inventory browser, works much more pleasant now.
*Added new Flag to the database, named as "CanHaveMoreThenOne".
That flag works only for the beltslot items, disabling the flag in the database section would make the item act as a single item.
Note! older Databases are rendered as unusable!
*Improved DB Reading, much faster now.
*Fixed the Equipment arrow editor to only show the proper items for the clicked slot.
*Updated Assembly to .Net Framework 4.5!
*Cleaned unused references, and code
*Fixed all the bugs known!

dynamis05
06-15-2014, 08:02 PM
has anyone had a rulers sword plus 10? its strange to ask because I seen a video of someone having a plus 10 when I know its a plus 5. don't suppose the editor has it to add this.

Jappi88
06-15-2014, 08:16 PM
has anyone had a rulers sword plus 10? its strange to ask because I seen a video of someone having a plus 10 when I know its a plus 5. don't suppose the editor has it to add this.

try adding that weapon using my tool, and upgrade it to +10...it should work, if not then your out of luck, it may be a dlc item, witch are not included into the tool yet.

pogi
06-15-2014, 08:53 PM
amazing work jappi thanks u !!! it work well now :016:

zigun3
06-15-2014, 09:20 PM
can't launch it now :125:

as soon as i try to open it, it say that "dark souls II save editor.exe" have encounter a error and need to close [send error report] [don't send]
is there a solution ? i've try to redownload it but it didn't work...



*Sorry for my Bad english

jc62953
06-15-2014, 10:35 PM
Okay so I looked through about 20 pages or so (probably more) and I can't figure out what my problem is. I modded my save the USB loader, all I did was add a bunch of items, well and changed my character level down one to make sure I could see the changes when I load my character. I saved the save through the editor then plugged it back into my Xbox. I load up DS2 and when I go to load up my character, everything is still the same as before I modded it... Without saving I check the save again and the save is still modded... any ideas on what I'm doing wrong?



*EDIT* and nevermind,m not sure what I did but I got it to work

Vis
06-16-2014, 12:21 AM
Hmm... I used it once, and it worked flawlessly, but upon creating a new character and using the editor again, I get the same "Failed to save returning to main menu" error in-game, in addition to not being able to go online. I went to use the "Restore STFS" option, but it goes to 86% before the editor itself gives me an error saying ""Buffer cannot be null. Parameter name: buffer". I'll try playing around with it and seeing if I can get it to work.

EDIT:

Well, I deleted the corrupted save and used my backup, and after I finished editing I still got the error, buuuuuut, this time the "Restore STFS" option didn't give me an error and after doing that and playing, everything seems to be working perfectly. The save doesn't close out to the main menu, and I can connect online. I imagine I'll probably have to use the "Restore STFS" option every time, but that's hardly a big deal. I'm still not sure what caused that STFS error before, but it hasn't happened since.
Thank you so much, Jappi!

@Shmooey:
I wouldn't add souls directly. It's better to add consumable souls (Old King Soul gives 75k), and I'd be careful with editing soul memory. If you edit it below what you'd have to have in order to be whatever level you are, FROM is likely to pick up on that. Be sure to use the "Restore STFS" option if you were having the same errors I was, as that was the sole thing that fixed it for me.

Shmooey
06-16-2014, 12:49 AM
Hmm... I used it once, and it worked flawlessly, but upon creating a new character and using the editor again, I get the same "Failed to save returning to main menu" error in-game, in addition to not being able to go online. I went to use the "Restore STFS" option, but it goes to 86% before the editor itself gives me an error saying ""Buffer cannot be null. Parameter name: buffer". I'll try playing around with it and seeing if I can get it to work.

Getting this same error for a lot of different things such as adding souls or reducing soul memory

darkaxis28
06-16-2014, 04:11 PM
I've got a question. Seeing as some slots aren't being read for some weird reason, can someone tell me what files coordinate to each of the 10 character slots for ps3? That way I can just decrypt, copy and rename the slots that work over the slots that don't and then just encrypt it back. I would really really appreciate any help someone could give me. Editing only 2 slots per save gets a little annoying...

Jappi88
06-16-2014, 05:03 PM
I've got a question. Seeing as some slots aren't being read for some weird reason, can someone tell me what files coordinate to each of the 10 character slots for ps3? That way I can just decrypt, copy and rename the slots that work over the slots that don't and then just encrypt it back. I would really really appreciate any help someone could give me. Editing only 2 slots per save gets a little annoying...


can you send me your save directory ? il make a fix for it

koski08
06-16-2014, 05:18 PM
thanks Jappi :)

i have a question: will you update parameter editor first or PC save compatibility?

Jappi88
06-16-2014, 05:31 PM
thanks Jappi :)

i have a question: will you update parameter editor first or PC save compatibility?

not sure yet, i have to rewite my stfs lib inorder to do the parameter editing , witch may take a while.
i also will need to reverse egineer the pc game, witch may also take a while...

There has been almost no donations made to support my work, i kinda get demotivated :/

darkaxis28
06-16-2014, 06:00 PM
can you send me your save directory ? il make a fix for it

Sure, I'll do that when I get home tonight.

JukeboxQ
06-16-2014, 07:34 PM
Many thanks for this Save Editor Jappi

statelesskiller
06-16-2014, 10:59 PM
one thing i have noticed is that i cannot change my level independently of my stat score. i maxed out my stats but it wont set my level to whatever i wish. it will instead go straight to the max stats even without legit stats calculation being on. im happy with the rest of this of course. i just want to help people of lower levels

ReDeMpTiOn213
06-16-2014, 11:00 PM
one thing i have noticed is that i cannot change my level independently of my stat score. i maxed out my stats but it wont set my level to whatever i wish. it will instead go straight to the max stats even without legit stats calculation being on. im happy with the rest of this of course. i just want to help people of lower levels

Level doesn't have anything to do with online. It is your soul memory that effects your online experience.

Anira
06-17-2014, 12:15 AM
If i had money Jappi i'd Donate. your work is amazing.

Only problem i've had with the new update is that when i go to adjust to slider for my characters hollow level the program locks up completely

ReDeMpTiOn213
06-17-2014, 12:19 AM
Jappi there is an bug when you add all the armors,swords,rings etc +10 to your item box it also adds all of the normal to your inventory as well. So you end up with what you want in your item box and extra non modified items that you didn't add.

P.S. Check your private messages. I have. Surprise for you :3 so please don't be discouraged about donations :(

darkaxis28
06-17-2014, 02:25 AM
Ok Jappi, I sent the link to you in you PMs.

Vis
06-17-2014, 03:44 AM
not sure yet, i have to rewite my stfs lib inorder to do the parameter editing , witch may take a while.
i also will need to reverse egineer the pc game, witch may also take a while...

There has been almost no donations made to support my work, i kinda get demotivated :/

I donated what I could. I'm sorry. :004:

dynamis05
06-17-2014, 10:59 AM
Does from check to see if you have nodded weapons that are not meant to pass an upgrade cap? For instance, I posted a couple days ago regarding me seeing someone with a rulers sword plus 10 when it is clearly supposed to be a plus 5. I used the editor and successfully made my ruler sword plus 10 and a couple other ones lol. But I am not sure if from checks that and I want to avoid being banned and will change them back asap. But if it's cool then I'll leave it as is.

ReDeMpTiOn213
06-17-2014, 11:35 AM
Does from check to see if you have nodded weapons that are not meant to pass an upgrade cap? For instance, I posted a couple days ago regarding me seeing someone with a rulers sword plus 10 when it is clearly supposed to be a plus 5. I used the editor and successfully made my ruler sword plus 10 and a couple other ones lol. But I am not sure if from checks that and I want to avoid being banned and will change them back asap. But if it's cool then I'll leave it as is.
I think the only way to get banned by weapons would be you giving someone them and they report you or that person really is an dark souls 2 moderator player.

Cronolus
06-17-2014, 12:33 PM
I'm having trouble actually getting it to load my game save what should i do to fix this?

darkaxis28
06-17-2014, 04:54 PM
Is anyone else having trouble with the newest update? It's not working for me. I keep on having to go back to the oldest version and try over again but it never works.

albino
06-17-2014, 08:02 PM
I followed all of the instructions and when I tried to play it claimed the save was corrupted and deleted it. Good thing I made a backup.

Shmooey
06-17-2014, 09:39 PM
I'm getting a failed to load character data error while trying to load up my character after I've added in some titanite and a weapon, what causes this and how can I prevent it?

ReDeMpTiOn213
06-17-2014, 09:41 PM
I'm getting a failed to load character data error while trying to load up my character after I've added in some titanite and a weapon, what causes this and how can I prevent it?

Have you tried using the STFS fixer after you modded your save or before you did?

Shmooey
06-17-2014, 09:42 PM
Have you tried using the STFS fixer after you modded your save or before you did?
I used it after I saved the changes

ReDeMpTiOn213
06-17-2014, 09:44 PM
I used it after I saved the changes

Try it without using the fixer. See if that works

- - - Updated - - -

Hey Jappi,
While i was making the Tut video for your save editor i have came across errors/bugs. I will have to put off the Tut video, because some of the features make your save editor look bad, and i don't want that to happen at all, because i know its splendid.

Bugs I came across filming:

-Moving the your Hollow Level sends the editor into "not responding mode"

-Adding items to "item box" also adds item into your inventory using "add all items", and Vice Versa.
--The only items added are the items you can have one of for the "items"
--It starts to work right after playing around and re deleting the items a few times.
--It happens to each category , but corrects itself after playing around.

-Loading a older save into the stfs fixer gives a "Buffer can not be nulled. Parameter Name: Buffer"
--The saves are from previous Parameter Updates, works with current Parameter thou 15155

-Loading PS3 Mega Mule Save into your editor sends it into "Not responding mode".
--(Only used mega mule because i need a ps3 save for filming purposes, couldn't find any other ps3 save)
--If you wait it out it loads up after 5 minutes or more, but only the first 2 characters thou.

Update: loading from USB and modding it from it. The mods done to it aren't saved.

I am not complaining. I appreciate all your work that you have done for us. It is a crying out shame that hardly anybody has donated to you for the magnificent save editor! Once i get my job secure i will try and donate to you! In the mean time i will make this TUT video as good as i can! I am adding in a part about donations so it will hopefully boost your donations. I will make it the very best i can so maybe people who like the TUT and will donate to you. Donations will be one of the main topics i will be hitting.

So Please Don't Give Up On This Editor :( Don't let the selfishness of others put you down. I will try and help you the most i can to take off some of the burden you have with people filing their errors to you. So please don't get demotivated! I hope looking at the Intro of the TUT i sent you and makes you happy/motivated. I have updated it to include your donations and put a heavy motive toward it.

Shmooey
06-17-2014, 09:58 PM
Try it without using the fixer. See if that works

Did this and it loaded up fine but after a few seconds of walking around I got the failed to save returning to main menu error

ReDeMpTiOn213
06-17-2014, 10:01 PM
Did this and it loaded up fine but after a few seconds of walking around I got the failed to save returning to main menu error

Okay. It's getting to something I have exp. with. Okay your going to have to make a brand new save entirely and inject your data(progress,inventory,build,progress) for each character using the Tool Tab in the editor. Do you know how to do this or do I need to explain it more.

Shmooey
06-17-2014, 10:05 PM
Okay. It's getting to something I have exp. with. Okay your going to have to make a brand new save entirely and inject your data(progress,inventory,build,progress) for each character using the Tool Tab in the editor. Do you know how to do this or do I need to explain it more.

You should definitely explain, I think I kind of know what to do but I want to be certain I dont screw anything up

ReDeMpTiOn213
06-17-2014, 10:09 PM
You should definitely explain, I think I kind of know what to do but I want to be certain I dont screw anything up


You just create a new save.
Hit create a new character.
When you spawn in and able to access the menu you can save and quit then.
Repeat until you have the allotted amount of characters you need.

P.S. When you go to insert the new save you just created make sure to leave the game at the title screen with the calibrations already downloaded and loaded!!!! Or it will fail again. So what i do is after I create the final character. I save and quit and just leave it at the title screen. When I am done recovering my save. I put it in and click my USB device and it loads up.

P.S.S. When make the new save load it up with the USB loader within the editor. When it loads your save click extract save to your desktop and load the save from your desktop. Reinsert all of your data for each character. Hit save. Close the save. Reopen the save again. Check to see if the inventory is character etc... If it isn't just reinsert the inventory data for that character in again and save. Repeat as needed. When everything is correct and saved load your usb in editor and click replace save. Then your done.

Just remember to set your torch time or you will have no torches and check the play through number and change that if need.

This does work and it works for me and I have helped a few other members with this problem and it has worked for them. If it doesn't work you did something wrong. Let me know if have any problems.


Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

Okay make a back up just in case and follow into between these instructions. Hopefully this should fix it.

Shmooey
06-17-2014, 10:21 PM
Okay make a back up just in case and follow into between these instructions. Hopefully this should fix it.

Alright side question, is using Horizon better or should I always use the usb thing that the editor has?

ReDeMpTiOn213
06-17-2014, 10:32 PM
Alright side question, is using Horizon better or should I always use the usb thing that the editor has?

Use the USB loader within the editor.

darkaxis28
06-17-2014, 10:50 PM
Can someone please help me, I am overly frustrated with this. I've redownloaded the program and it just will not work. I'm stuck with a 1.0.0.8 version of the program as a backup which I cannot even use becasue I am just prompted to update it every single time. But the update never works as nothing comes up when I try to open the new and updated file. It doesn't make any sense at all, Especially since the 1.0.1.1 updated version is 7.6 KB to the 1.0.0.8 version is 7.9 KB. What's wrong and how can I fix this??

ReDeMpTiOn213
06-17-2014, 10:52 PM
Can someone please help me, I am overly frustrated with this. I've redownloaded the program and it just will not work. I'm stuck with a 1.0.0.8 version of the program as a backup which I cannot even use becasue I am just prompted to update it every single time. But the update never works as nothing comes up when I try to open the new and updated file. It doesn't make any sense at all, Especially since the 1.0.1.1 updated version is 7.6 KB to the 1.0.0.8 version is 7.9 KB. What's wrong and how can I fix this??

Try turning off your internet before you try to use the editor. So it has no connection to update

Vis
06-17-2014, 11:08 PM
Does from check to see if you have nodded weapons that are not meant to pass an upgrade cap? For instance, I posted a couple days ago regarding me seeing someone with a rulers sword plus 10 when it is clearly supposed to be a plus 5. I used the editor and successfully made my ruler sword plus 10 and a couple other ones lol. But I am not sure if from checks that and I want to avoid being banned and will change them back asap. But if it's cool then I'll leave it as is.
They have a warning on their website stating that you should only pick up items dropped by people you trust because if you pick up a modded item your account might be flagged, so it stands to reason that if you have modded items (meaning items with edited parameters that could not be obtained through normal gameplay) that you have save edited in then you'll be flagged as well, but that could just be scare tactics.

http://support.bandainamcogames.com/index.php?/Knowledgebase/Article/View/425/368/dark-souls-ii---is-my-account-blockedbanned-from-using-the-dark-souls-ii-servers

As for just using the editor to add legitimate non-modified items, they can't seem to detect that, as I've been using this for weeks online.

darkaxis28
06-17-2014, 11:11 PM
Try turning off your internet before you try to use the editor. So it has no connection to update

ok, but how do I get the update to actually work? Am I just stuck with 1.0.0.8??

ReDeMpTiOn213
06-17-2014, 11:22 PM
ok, but how do I get the update to actually work? Am I just stuck with 1.0.0.8??

What is your email and I will email you a copy of my save editor and resources. You can pm it if you prefer not to post it

darkaxis28
06-17-2014, 11:27 PM
What is your email and I will email you a copy of my save editor and resources. You can pm it if you prefer not to post it

I sent it to you in your PMs

albino
06-17-2014, 11:30 PM
Have you tried using the STFS fixer after you modded your save or before you did?

So you have to use the STFS fixer after making changes?

ReDeMpTiOn213
06-17-2014, 11:32 PM
So you have to use the STFS fixer after making changes?

No only if you have problems. I usually just do it each time I go to mod it. Like when I first load it up. But you shouldnt have to.


I sent it to you in your PMs

Okay it wouldn't let me email it too you because it said it was a security risk haha but I will upload it to media fire and email you the link

albino
06-17-2014, 11:52 PM
Alright, thanks. Could I be banned for using this, even if I make the character possible?

ReDeMpTiOn213
06-17-2014, 11:53 PM
Alright, thanks. Could I be banned for using this, even if I make the character possible?

Can you please explain a little more


I sent it to you in your PMs

Hey check your email and the link will be in it

Vis
06-18-2014, 12:04 AM
Alright, thanks. Could I be banned for using this, even if I make the character possible?

From/Namco Bandai could ban you for whatever they want, but as long as you keep everything within the boundaries of the game, you should be fine. If you want to play it safe, this means don't change the parameters of the items, don't edit your soul memory down to an impossible amount, etc. etc. There's no guarantee, but I haven't been banned and I've made 7 characters that have been edited. Definitely saves time on making PVP characters. ^_^

ReDeMpTiOn213
06-18-2014, 12:06 AM
From/Namco Bandai could ban you for whatever they want, but as long as you keep everything within the boundaries of the game, you should be fine. If you want to play it safe, this means don't change the parameters of the items, don't edit your soul memory down to an impossible amount, etc. etc. There's no guarantee, but I haven't been banned and I've made 7 characters that have been edited. Definitely saves time on making PVP characters. ^_^

You can be banned for anything haha but I used to run around with a maxed character with everything completely maxed out at zero soul memory and I still haven't been banned. Haha so don't be stupid with what you do and don't abuse it. You will be fine.

Vis
06-18-2014, 12:24 AM
You can be banned for anything haha but I used to run around with a maxed character with everything completely maxed out at zero soul memory and I still haven't been banned. Haha so don't be stupid with what you do and don't abuse it. You will be fine.

I have seen people talk about how they were banned for save editing so it has happened. I'm not sure what their editing entailed, nor what program they used to make said edits, but like I said as long as he/anyone keeps the editing kosher he/anyone should be fine.

voidsd666
06-18-2014, 12:38 AM
Holy bat snipes Jappi! I can't wait to give this a try. Keep up the great work and I look forward to your next great editor (whatever that will be). Thanks for all the great work you do!

Nikohi
06-18-2014, 01:07 AM
The only problem I have is that there's no health or stamina editor on here. How am I supposed to give myself unlimited HP and stamina? It's only fun to use in PVP, but I like to keep my stats legit when playing alone.

Sephiroth
06-18-2014, 01:50 AM
The only problem I have is that there's no health or stamina editor on here. How am I supposed to give myself unlimited HP and stamina? It's only fun to use in PVP, but I like to keep my stats legit when playing alone.

http://www.360haven.com/forums/threads/33093-Dark-Souls-II-Parameter-Editor?highlight=dark+souls+2

Ralicht
06-18-2014, 02:10 AM
From/Namco Bandai could ban you for whatever they want, but as long as you keep everything within the boundaries of the game, you should be fine. If you want to play it safe, this means don't change the parameters of the items, don't edit your soul memory down to an impossible amount, etc. etc. There's no guarantee, but I haven't been banned and I've made 7 characters that have been edited. Definitely saves time on making PVP characters. ^_^

I've been banned on 5 or so accounts. They seem to look for impossible item stacks and stats more than anything.

Adelfos
06-18-2014, 04:14 AM
Jappi you make me moist<3

pcweekly
06-18-2014, 07:25 AM
Jappi, thank you for your update. It is wonderful and works well for editing the PS3 save.

However, is it possible to solve the Santier's Spear issue... It should be the spear that could be evolved, while its durability reaches to zero. Since there is no option of setting the durability to zero, even I selected the evolved Santier's Spear, it would still be turned back to the original Santier's Spear with a big rock at the tip...or, please let me know, if it is my problem of not being familiar with the settings... Thanks for your attention, anyway...

TheDragonMan
06-18-2014, 11:28 AM
Downloaded it, Tried running it, Keeps saying it has "Stopped Working" not sure what the problem is here.

jordanp01
06-18-2014, 01:44 PM
thanks alot looks good

venomor
06-19-2014, 12:00 AM
Thx Jappi for this new update ^^ I was wondering, since you said that my saves were corrupted, could this new update fix them? I haven't touched them since then :127:

ReDeMpTiOn213
06-19-2014, 10:27 PM
Thx Jappi for this new update ^^ I was wondering, since you said that my saves were corrupted, could this new update fix them? I haven't touched them since then :127:

When you load the corrupted save(s) hit or actually the STFS fixer will automatically pop up and explains what it will do. So yes it should work.

Forgiven
06-20-2014, 01:25 AM
I recently started a thread asking for help on an error, and was told to download microsoft .net framework 4.5. The only problem is, I am on windows XP, and it is only supported in 7 and vista.
The error is I get, is right at startup; "dark souls ii save editor has encountered a problem and needs to close."
What do?

ReDeMpTiOn213
06-20-2014, 01:28 AM
I recently started a thread asking for help on an error, and was told to download microsoft .net framework 4.5. The only problem is, I am on windows XP, and it is only supported in 7 and vista.
The error is I get, is right at startup; "dark souls ii save editor has encountered a problem and needs to close."
What do?

Can you upgrade your windows operation system?

Forgiven
06-20-2014, 01:35 AM
Can you upgrade your windows operation system?

I've never really tried, although windows 7 would be nice to have. How do I know if my computer could run it?

ReDeMpTiOn213
06-20-2014, 01:39 AM
I've never really tried, although windows 7 would be nice to have. How do I know if my computer could run it?

Can you give me your computer specs ?
Click start I believe
Right click on computer and click properties

Forgiven
06-20-2014, 01:50 AM
Can you give me your computer specs ?
Click start I believe
Right click on computer and click properties15179
I can get the dxdiag results to if you need.

ReDeMpTiOn213
06-20-2014, 01:51 AM
15179
I can get the dxdiag results to if you need.

Yes, but pm me. So we don't get in trouble for posting stuff not regarding the editor.

skylarkze
06-20-2014, 02:55 AM
Dear Mr Jappi88

Can i request you,to make editor for PC....

PM me in PRIVATE just only for me...

THANK YOU & GODSPEED..

shandycand
06-20-2014, 07:39 AM
im probably just retarded but i the editor crashes as soon as i start it. here is the report. any help would be much appreciated.
1518115180

ReDeMpTiOn213
06-20-2014, 07:43 AM
im probably just retarded but i the editor crashes as soon as i start it. here is the report. any help would be much appreciated.
1518115180

Have you upgraded your framework to 4.5?

hi def meep
06-20-2014, 08:06 AM
am i missing something here? i plug my save in, load from usb, mod it, save it back, and try to load it, but when i load it, it's just the original save, like i never modified it.

ReDeMpTiOn213
06-20-2014, 08:09 AM
am i missing something here? i plug my save in, load from usb, mod it, save it back, and try to load it, but when i load it, it's just the original save, like i never modified it.

Extract it to the desktop. Load it from the desktop. Mod it. Save it. And replace it to the USB drive. Don't think modding straight from the USB saves. possibly a bug. But works the way I told you thou.

hi def meep
06-20-2014, 08:29 AM
okay i loaded my save manually using horizon. Now the save will load, but when the game tries to autosave, it says the game failed to save, and it kicks me back to the title screen, at which point it says my save is corrupted when i try to load it again. It also won't even let me attach the save to this post, saying that it's invalid when i try to upload it so i have no idea wtf im supposed to do. i added 2 sets of 800 soul of a great hero, reset my level to 1, changed my class to deprived, and changed my soul memory to 0. Basically i just reset my characters stats to a new char, as i wanted to rebuild him from the ground up for pvp. I also changed my playthrough to 1, redid my gestures, and i think i changed the blood covenant to 3 stars, hoping that it would actually make me a top tier blood covenant but that's never worked before so idk. please help, this is stressing me out.

ReDeMpTiOn213
06-20-2014, 08:36 AM
okay i loaded my save manually using horizon. Now the save will load, but when the game tries to autosave, it says the game failed to save, and it kicks me back to the title screen, at which point it says my save is corrupted when i try to load it again. It also won't even let me attach the save to this post, saying that it's invalid when i try to upload it so i have no idea wtf im supposed to do. i added 2 sets of 800 soul of a great hero, reset my level to 1, changed my class to deprived, and changed my soul memory to 0. Basically i just reset my characters stats to a new char, as i wanted to rebuild him from the ground up for pvp. I also changed my playthrough to 1, redid my gestures, and i think i changed the blood covenant to 3 stars, hoping that it would actually make me a top tier blood covenant but that's never worked before so idk. please help, this is stressing me out.


Hey try using the built in USB loader within the editor. Horizon has been known to cause issues with the save causing the modded dark souls 2 save to become
Corrupt and no longer able to save. Last time I use horizon for a dark souls save it change the size if the file from 14.06 mb to 8.96 mb which cause a problem when you try to replace it in horizon as well and brought the problems I mentioned above. If you need help I will try and help you.


If you read there is a solution that has be working for me. Doesn't have to be four. Create how many characters you need to replace. Like if you scroll up and read the one person need four replaced, which this little wall through is based off of.


Okay start a brand new save with four new characters. You don't have to play any. Just Create it and save. Until you have 4 characters. Then you load your save that's not corrupted etc and for Each character extract their progress,build, stats, and inventory. This is under the Tool tab. After you have all your characters stuff. Load up your new save and for each character replace their stats,build,progress, and inventory. To that one that you want it to have. Do that for each one character. Make sure you use the USB loader in the save editor. And do this exactly as I tell you.

Extract the save from the USB in the editor to your desktop and load the save into your editor from the desktop not from the USB. Insert all the files into each character that you want the files to go into. And rename the character to its original name and set it's play through number. After your finish with each character. Save it. Or save it each time. Close the save entirely and re load it. Check to make sure your inventory is there for each character. If it isn't just reinsert it back and save it. Repeat process until the save is correct.

Try this but before you do try to fix your save using the STFS fixer in the editor.

DaNexusNinja
06-20-2014, 09:22 AM
Hey does anyone have a download link for version 1.0.1.0. I'm on windows XP and so can't use net framework 4.5.

ReDeMpTiOn213
06-20-2014, 01:26 PM
Hey does anyone have a download link for version 1.0.1.0. I'm on windows XP and so can't use net framework 4.5.

By any chance do you think you could update your windows version to windows vista or 7? But if you can't reback through the posts until you see someone talking about their 1.0.1.1 not working. I think it was Darkaxis. Ask that person in a Pm and possible he could help you but it's not a guarantee. I think it would be by far easier to just update your operation system and installs framework 4.5.

devilof94
06-20-2014, 08:00 PM
So I saw this and got really excited as I finally found a way to start testing some builds I wanted to try out, but when I download the file and try to run it, it simply doesn't work. The second I hit run it tells me the program has stopped working. I've tried running as administrator, running it in compatibility mode with different service packs but I simply cant get the program to start. Any help?

ReDeMpTiOn213
06-20-2014, 08:01 PM
So I saw this and got really excited as I finally found a way to start testing some builds I wanted to try out, but when I download the file and try to run it, it simply doesn't work. The second I hit run it tells me the program has stopped working. I've tried running as administrator, running it in compatibility mode with different service packs but I simply cant get the program to start. Any help?

Do you have framework 4.5 installed

devilof94
06-20-2014, 08:21 PM
Do you have framework 4.5 installed
Man I never would of guessed that, thanks! Also I apologize if someone with a similar issue already posted and had this resolved, 89 pages is a lot to sort through hah.

ReDeMpTiOn213
06-20-2014, 08:23 PM
Man I never would of guessed that, thanks! Also I apologize if someone with a similar issue already posted and had this resolved, 89 pages is a lot to sort through hah.

Actually it's one of the newest issues people are having haha but no problem

MehWhatever
06-20-2014, 08:24 PM
Thanks, Jappi, Quality as always.

jb8123
06-20-2014, 09:22 PM
Thanks as always Jappi.

aygul
06-21-2014, 12:32 PM
How is this editor doing? do you still need Buffolo?

ReDeMpTiOn213
06-21-2014, 12:33 PM
How is this editor doing? do you still need Buffolo?

Nope. There are some new bugs that have occurred other than that it works great

aygul
06-21-2014, 12:57 PM
Nope. There are some new bugs that have occurred other than that it works great

Like what?

What is the best way to mod your save

Safest way*

ReDeMpTiOn213
06-21-2014, 01:04 PM
Like what?

What is the best way to mod your save

Safest way*


Try it without using the fixer. See if that works

- - - Updated - - -

Hey Jappi,
While i was making the Tut video for your save editor i have came across errors/bugs. I will have to put off the Tut video, because some of the features make your save editor look bad, and i don't want that to happen at all, because i know its splendid.

Bugs I came across filming:

-Moving the your Hollow Level sends the editor into "not responding mode"

-Adding items to "item box" also adds item into your inventory using "add all items", and Vice Versa.
--The only items added are the items you can have one of for the "items"
--It starts to work right after playing around and re deleting the items a few times.
--It happens to each category , but corrects itself after playing around.

-Loading a older save into the stfs fixer gives a "Buffer can not be nulled. Parameter Name: Buffer"
--The saves are from previous Parameter Updates, works with current Parameter thou 15155

-Loading PS3 Mega Mule Save into your editor sends it into "Not responding mode".
--(Only used mega mule because i need a ps3 save for filming purposes, couldn't find any other ps3 save)
--If you wait it out it loads up after 5 minutes or more, but only the first 2 characters thou.

Update: loading from USB and modding it from it. The mods done to it aren't saved.

I am not complaining. I appreciate all your work that you have done for us. It is a crying out shame that hardly anybody has donated to you for the magnificent save editor! Once i get my job secure i will try and donate to you! In the mean time i will make this TUT video as good as i can! I am adding in a part about donations so it will hopefully boost your donations. I will make it the very best i can so maybe people who like the TUT and will donate to you. Donations will be one of the main topics i will be hitting.

So Please Don't Give Up On This Editor :( Don't let the selfishness of others put you down. I will try and help you the most i can to take off some of the burden you have with people filing their errors to you. So please don't get demotivated! I hope looking at the Intro of the TUT i sent you and makes you happy/motivated. I have updated it to include your donations and put a heavy motive toward it.


These are some that I have found when trying to make a video TUT for Jappi. There aren't really that big of a problem because you can work around them. And a new that has occurred for other members on older windows operation systems they can't update framework 4.5 which is needed to run this editor.

Best way: what I do is extract the save to the desktop. Mod it to what I want. And save. And replace it back into the USB with the built in editor. Right now there is a bug where it doesn't save when you try to load and mod it straight from the USB.

Note: add all of your items manually because when I use add all items. It adds to inventory and item box etc...

LaxGrip
06-21-2014, 06:27 PM
Jappi yet another great Editor, I really envy your talent and ability. So much so, that I'm going to major in computer science due to your inspiration since I found this website. I do however have a personally issue that idk if anyone else has run in to or has been resolved or what. On ps3, copying a save to the usb is prohibited, is there another method or something that I've missed? Thank you so much Jappi and anyone who takes the time to resolve my issue.

ReDeMpTiOn213
06-21-2014, 06:40 PM
Jappi yet another great Editor, I really envy your talent and ability. So much so, that I'm going to major in computer science due to your inspiration since I found this website. I do however have a personally issue that idk if anyone else has run in to or has been resolved or what. On ps3, copying a save to the usb is prohibited, is there another method or something that I've missed? Thank you so much Jappi and anyone who takes the time to resolve my issue.

Backing Up Game Saves to Memory Stick

1. On the XMB (cross media bar), go to the Game section.
2. Go to Game Saves
3. Put in your memory stick (cf, ms duo, sd)
4. Find the game save you want to copy/backup, highlight it and hit the Triangle button.
5. Choose the menu option to Copy
6. Hit the X button on the memory stick and let it copy.

Copy protected game saves
A few games have copy protected game save files. To backup these files you can’t just copy them to a memory stick, you will need to do an actual system backup.

To do a full system backup (this will basically copy ALL of the photos, music, videos and game save files and settings on the PS3 to a backup folder; you will need to have an external usb harddrive or thumbdrive w/enough space on it).

In the XMB, go to System
Go to Settings > System Settings > Backup Utility
Then choose Back Up
Finally, pick the device to backup too (memory stick, usb harddrive, etc).

venomor
06-21-2014, 07:45 PM
If I use the restore stfs, after I can re-edit my saves?

ReDeMpTiOn213
06-21-2014, 07:48 PM
If I use the restore stfs, after I can re-edit my saves?

Yes. I usually use it right when load up and the do my editing. Or you can do after it or do it before and after.

LaxGrip
06-21-2014, 08:15 PM
Thanks ReDeMpTiOn, I'll have to pick up an external hard drive

ReDeMpTiOn213
06-21-2014, 08:18 PM
Thanks ReDeMpTiOn, I'll have to pick up an external hard drive

Your welcome. If you have any more questions feel free to ask.

hi def meep
06-21-2014, 11:10 PM
yea i cant get that solution to work redemption, anytime i try to replace the stats of the character, it freezes.

ReDeMpTiOn213
06-21-2014, 11:12 PM
yea i cant get that solution to work redemption, anytime i try to replace the stats of the character, it freezes.

Which solution may ask? I have been trying to help a lot. Can you please remind me :)

evilhotice
06-22-2014, 04:05 AM
Just tried modding the durability for my shield, sword, and armor to 999 and it's not reflecting that in game. It goes back to default after loading my save. Has the location changed due to the patch? On 360 btw.

Sddn
06-22-2014, 05:56 AM
so i set my playthrough number to three so that i could buy the covenant spells from the chancellor in order to get my achievement, but he is not selling them for some reason, even though it is apparently playthrough 3

Jappi88
06-22-2014, 01:58 PM
ChangeLog 1.0.1.2

*Fixed bug in equipment.
*Fixed bug in usb saving.
*Fixed Hallow level UI Freezing
*Fixed inventory itembox adding.
*Added option to enable/disable item propertie viewer in inventory editor.
*Fixed crash when tool restarts after updating.
*Improved Update thread operations.
*Fixed DataBase multiple download when its corrupted, one time should be enough :P
*Downgraded .Net to 4.0 instead of 4.5, to help out xp users!

DaNexusNinja
06-22-2014, 02:17 PM
Thank you so much Jappi for downgrading to net 4.0 it means alot for us still stuck on XP haha. Thanks again.

ReDeMpTiOn213
06-22-2014, 02:20 PM
Hey Jappi,
Thank you for your update. I will be starting your TUT now. :) I do have a quick question thou. What happened to being able to add x9999 of a item? Was it causing to many problems with people or something. I am just curious.

Jappi88
06-22-2014, 02:29 PM
Hey Jappi,
Thank you for your update. I will be starting your TUT now. :) I do have a quick question thou. What happened to being able to add x9999 of a item? Was it causing to many problems with people or something. I am just curious.

9999 is only allowed for arrows, items should be at 999 max.
equiped items can only go up to 99

just because it reduces freezing and corruption chances.

ReDeMpTiOn213
06-22-2014, 02:32 PM
9999 is only allowed for arrows, items should be at 999 max.
equiped items can only go up to 99

Ok thank you. I was just curious because I remember the few earlier updates had the ability to make items x9999. But hey no big deal I can just that nifty duplicate button now. Thank you Jappi. We appreciate all your hard work!

cjjkels
06-22-2014, 05:34 PM
had a little problem with USB saves but this new release works perfect THANK YOU for your hard work

Shmooey
06-22-2014, 06:24 PM
Ok I'm just going to ignore my previous problems because maybe these questions/current issues i have will solve them

1) Im pretty sure someone said the normal save size is around 14 mb, mine is only 8.8 so that might be something
2) The editor doesnt detect any saves on my usb when i try to use the usb loader thing
3) I dont know why it does this but whenever i get done editing anything inventory wise and i load up my save to play anything, all my equipment is flipped liked say i had a sunsword in my right hand and a shield in my left, when id go to play theyd be swapped

Yea i dunno maybe ive just been doing everything wrong

ReDeMpTiOn213
06-22-2014, 06:43 PM
Ok I'm just going to ignore my previous problems because maybe these questions/current issues i have will solve them

1) Im pretty sure someone said the normal save size is around 14 mb, mine is only 8.8 so that might be something
2) The editor doesnt detect any saves on my usb when i try to use the usb loader thing
3) I dont know why it does this but whenever i get done editing anything inventory wise and i load up my save to play anything, all my equipment is flipped liked say i had a sunsword in my right hand and a shield in my left, when id go to play theyd be swapped

Yea i dunno maybe ive just been doing everything wrong

Okay the flip flop of weapons etc is normal because it has been doing it to me for a while. Shouldn't effect your save. And the normal size is 14 mb but if you have used horizon it resizes the save. I know that because It has happened to me. Create a new save and reinject all your data back into the new save if you want to have the normal 14 mb. That's if you are having trouble. And for the loader not detecting any saves. Try and load a brand new save that is 14 mb and see if that fixes it. So back up your save. And go and create brand new one and character to see. :) if the new save works I may be able to help you with your save not showing up but that is only if the new 14 mb save is detected.

Shmooey
06-22-2014, 06:49 PM
Okay the flip flop of weapons etc is normal because it has been doing it to me for a while. Shouldn't effect your save. And the normal size is 14 mb but if you have used horizon it resizes the save. I know that because It has happened to me. Create a new save and reinject all your data back into the new save if you want to have the normal 14 mb. That's if you are having trouble. And for the loader not detecting any saves. Try and load a brand new save that is 14 mb and see if that fixes it. So back up your save. And go and create brand new one and character to see. :) if the new save works I may be able to help you with your save not showing up but that is only if the new 14 mb save is detected.
By make a new save do you mean just make a new character?

Edit: ignore what I just said, I reread your post and now feel stupid

ReDeMpTiOn213
06-22-2014, 06:51 PM
By make a new save do you mean just make a new character?

Edit: ignore what I just said, I reread your post and now feel stupid

Sorry. I should have been more detailed. Bit yes make a entirely new save and have one new character on it.

Shmooey
06-22-2014, 06:57 PM
Sorry. I should have been more detailed. Bit yes make a entirely new save and have one new character on it.
Alright went and did that but it still says no save found

ReDeMpTiOn213
06-22-2014, 07:09 PM
Alright went and did that but it still says no save found

It may be your USB drive itself because I know it worked with mine when I tried the load and save straight from the USB drive with editor. Do you have another USB you could try?

Shmooey
06-22-2014, 07:10 PM
It may be your USB drive itself because I know it worked with mine when I tried the load and save straight from the USB drive with editor. Do you have another USB you could try?
Yea I've got another one somewhere around here, I'll try it in a moment and report back with results

Sent from my Galaxy S3 using Tapatalk

ReDeMpTiOn213
06-22-2014, 07:12 PM
Yea I've got another one somewhere around here, I'll try it in a moment and report back with results

Sent from my Galaxy S3 using Tapatalk

Okay. I am using USB that my mom got as a free sample. It is 2gb I think. If all of that fails you could try reformatting your USB with your xbox.

Jappi88
06-22-2014, 07:30 PM
Ok I'm just going to ignore my previous problems because maybe these questions/current issues i have will solve them

1) Im pretty sure someone said the normal save size is around 14 mb, mine is only 8.8 so that might be something
2) The editor doesnt detect any saves on my usb when i try to use the usb loader thing
3) I dont know why it does this but whenever i get done editing anything inventory wise and i load up my save to play anything, all my equipment is flipped liked say i had a sunsword in my right hand and a shield in my left, when id go to play theyd be swapped

Yea i dunno maybe ive just been doing everything wrong

1) you can use the "Fix STFS" to restore your save back to 14mb
2)Try running the tool as admin mode, and make sure all programs that allows you to manage your drives are closed!
3)Thats normal, and not hard to fix on my side, neither on yours, you can simply remember what slots are swapped and work the other way arround.

ReDeMpTiOn213
06-22-2014, 07:31 PM
1) you can use the "Fix STFS" to restore your save back to 14mb
2)Try running the tool as admin mode, and make sure all programs that allows you to manage your drives are closed!
3)Thats normal, and not hard to fix on my side, neither on yours, you can simply remember what slots are swapped and work the other way arround.

Hey Jappi. By any chance do you have a nonmodified ps3 save of dark souls 2? I need it for the video

Jappi88
06-22-2014, 07:48 PM
Hey Jappi. By any chance do you have a nonmodified ps3 save of dark souls 2? I need it for the video

no sorry, but you should be able to find a few if you browse a few pages back

DarkSpiritLion
06-22-2014, 11:30 PM
I'm having the same issue with the equipment-flip thing. Also, my saves always get corrupted when I use the editor. Not sure why. When it did work, it was perfect. Much love from this 360 Haven noob.

ReDeMpTiOn213
06-22-2014, 11:31 PM
I'm having the same issue with the equipment-flip thing. Also, my saves always get corrupted when I use the editor. Not sure why. When it did work, it was perfect. Much love from this 360 Haven noob.

If your save gets corrupted or freezes. Use the restore STFS feature in the editor.

DarkSpiritLion
06-22-2014, 11:36 PM
If your save gets corrupted or freezes. Use the restore STFS feature in the editor.
I have been using it, but to no avail.

ReDeMpTiOn213
06-22-2014, 11:39 PM
I have been using it, but to no avail.

Okay if that doesn't work use the tool tab and extract your progress,build,inventory, and stats. For each character. Then create a new save entirely and within the new save create the allotted amount characters you had and inject the data of each character into the character of the new save.

ReDeMpTiOn213
06-23-2014, 03:05 PM
no sorry, but you should be able to find a few if you browse a few pages back
Hey Jappi can you please check your inbox for my PM and i think i found another bug in the inventory add all tab, but i will have to test it again to see how often it reoccurs or if it was my laptop lagging out. Thanks for your time :)

Hey Jappi, there is a bug with the editor when loading the PS3 saves. it loads it the first time but when you load it the second time. it gets the error " Encrypted data seems to be invalid, a validated file is required for this operation." here is the save that works. These saves are courtesy of 4esfera (http://www.360haven.com/forums/members/237427-4esfera),
https://mega.co.nz/#!EM5DSBpB!LcD1x4pv0VLIz6tqiKbWGuydOLxDYonZseK6Kw0 5v2Q

Jappi88
06-24-2014, 05:37 AM
Hey Jappi, there is a bug with the editor when loading the PS3 saves. it loads it the first time but when you load it the second time. it gets the error " Encrypted data seems to be invalid, a validated file is required for this operation." here is the save that works. These saves are courtesy of 4esfera (http://www.360haven.com/forums/members/237427-4esfera),
https://mega.co.nz/#!EM5DSBpB!LcD1x4pv0VLIz6tqiKbWGuydOLxDYonZseK6Kw0 5v2Q


Crap! i forgot to disable the test code i was using...it leaves a ps3 file decrypted :/ it will be back encrypted when you hit save, if you dont hit save then it will stay decrypted and prop cause corruption :/

Fix will come later.

ReDeMpTiOn213
06-24-2014, 07:54 AM
Crap! i forgot to disable the test code i was using...it leaves a ps3 file decrypted :/ it will be back encrypted when you hit save, if you dont hit save then it will stay decrypted and prop cause corruption :/

Fix will come later.

It's okay Jappi. :) I came across this when filming. Thanks to 4esfera for telling me it was a bug. I thought I was doing something wrong :P

LtWinters
06-24-2014, 07:47 PM
Now I know this could be a nooby question but how do you copy the save on to the usb to edit it when that save is prohibited? This is for ps3

4esfera
06-24-2014, 07:53 PM
Now I know this could be a nooby question but how do you copy the save on to the usb to edit it when that save is prohibited? This is for ps3
You cant do it in a ps3 OFW, you need a jailbreack ps3
You can use my save for edit with the save editor, its above to your message

LtWinters
06-24-2014, 08:05 PM
Cheers for that!

krixous
06-25-2014, 12:59 AM
ok so I went to use this again today but when I clicked the app it was deleted for some reason, so after downloading it again and locating a save and trying to load it, an error pops up saying:
object reference not set to an instance of an object.

is it broke? I tried extracting the file and loading it that way but the same issue occurred.
(xbox 360 save)

also another issue I had previously was that I had to always extract the file and load the extracted one because when I went to save it would always freeze at the very end and never show the popup saying save complete etc.
I also couldn't replace the files so I was stuck waiting on horizon to load so I could inject the save into my flash drive,,,
over all this editor is a very user friendly save editor and I love it a lot especially with the pictures of the equipment since sometimes I don't remember the names
if you could fix the first problem I would be content the other two I can live with

ReDeMpTiOn213
06-25-2014, 01:06 AM
ok so I went to use this again today but when I clicked the app it was deleted for some reason, so after downloading it again and locating a save and trying to load it, an error pops up saying:
object reference not set to an instance of an object.

is it broke? I tried extracting the file and loading it that way but the same issue occurred.
(xbox 360 save)

also another issue I had previously was that I had to always extract the file and load the extracted one because when I went to save it would always freeze at the very end and never show the popup saying save complete etc.
I also couldn't replace the files so I was stuck waiting on horizon to load so I could inject the save into my flash drive,,,
over all this editor is a very user friendly save editor and I love it a lot especially with the pictures of the equipment since sometimes I don't remember the names
if you could fix the first problem I would be content the other two I can live with
So the program self deleted itself? that is the first time i heard of that. What operation system is your computer running? Maybe you could fully delete the editor again and redownload it.

krixous
06-25-2014, 01:12 AM
So the program self deleted itself? that is the first time i heard of that. What operation system is your computer running? Maybe you could fully delete the editor again and redownload it.

I'm using windows 8 I will try to remove the program completely and see if that does anything. this is the first time I have had it happen to me too didn't know why it was deleted but the app was still there when I checked download but it said...

Dark Souls II Save Editor_OLD as its file name and showed up as no longer there when I try to load it

ReDeMpTiOn213
06-25-2014, 01:16 AM
I'm using windows 8 I will try to remove the program completely and see if that does anything. this is the first time I have had it happen to me too didn't know why it was deleted but the app was still there when I checked download but it said...

Dark Souls II Save Editor_OLD as its file name and showed up as no longer there when I try to load it
Yeah might be best to fully remove everything. or you could try removing the "_OLD" from the file name. it only does that when it is updating and that is what it renames the old .exe (Dark Souls II Save Editor ------> Dark Souls II Save Editor_OLD) to when it goes to update. Maybe it was trying to update and got messed up idk. It kinda sounds like it to. I have windows 8.1

krixous
06-25-2014, 01:23 AM
Yeah might be best to fully remove everything. or you could try removing the "_OLD" from the file name. it only does that when it is updating and that is what it renames the old .exe (Dark Souls II Save Editor ------> Dark Souls II Save Editor_OLD) to when it goes to update. Maybe it was trying to update and got messed up idk. It kinda sounds like it to. I have windows 8.1

runing windows 8.1*, remvoed it completely and redownloaded going to test it now


runing windows 8.1*, remvoed it completely and redownloaded going to test it now

hahaha there it goes it runs now =) guess thats all i needed to do must have been like you said failed to update

now then the only other problem is saving it
when i load a file from usb it freezes when i save it right at the point where the save complete would normaly pop up... like i said not a big deal i can always extract it save it that way and then inject with horizon since the replace file on this one always seems to crash the app for me

ReDeMpTiOn213
06-25-2014, 01:31 AM
hahaha there it goes it runs now =) guess thats all i needed to do must have been like you said failed to update

now then the only other problem is saving it
when i load a file from usb it freezes when i save it right at the point where the save complete would normaly pop up... like i said not a big deal i can always extract it save it that way and then inject with horizon since the replace file on this one always seems to crash the app for me
Have you tried using the STFS fixer? maybe that will fix the crashing. I dont fully understand what is going on. Can you be very detailed on what is wrong?

krixous
06-25-2014, 02:50 AM
when i try to use replace save or replace character the app goes "Not Responding" and im forced to close waiting does not help
as for saving whenever i load a save dirctly from my usb and try to use save all files or save changes it completes saving however the blue bar showing progress never goes away and the popup saying save complete never pops up untill i remove the usb however it dosn't actualy applay any changes

ReDeMpTiOn213
06-25-2014, 02:51 AM
when i try to use replace save or replace character the app goes "Not Responding" and im forced to close waiting does not help
as for saving whenever i load a save dirctly from my usb and try to use save all files or save changes it completes saving however the blue bar showing progress never goes away and the popup saying save complete never pops up untill i remove the usb however it dosn't actualy applay any changes

Do you have another usb drive you could try?

Spectralv
06-25-2014, 03:52 PM
i'm a little skeptic about using this, i have made the file and everything fine but when i load my character it freezes my xbox lol, also if i use this for pvp say level 225 with 500k soul memory and all the item i can put on it in the inventory editor will i get banned you think? if you think it is safe to do online and i wont get caught then how can i fix it from freezing my xbox when i go to the character menu to select my save?

ReDeMpTiOn213
06-25-2014, 04:01 PM
i'm a little skeptic about using this, i have made the file and everything fine but when i load my character it freezes my xbox lol, also if i use this for pvp say level 225 with 500k soul memory and all the item i can put on it in the inventory editor will i get banned you think? if you think it is safe to do online and i wont get caught then how can i fix it from freezing my xbox when i go to the character menu to select my save?

Use the StFS fixer in the editor and see if that works. And if you dont abuse or give anybody modded weapons. You will be fine. I use this editor everyday and play online everyday

Spectralv
06-25-2014, 04:26 PM
am i able to just lower my soul level on my character a little to get back to the good range? im 9m soul level but only level 227 which is a little high i guess, an way i can drop my level to say 200 and make my soul memory the minimum+ for that level?

also what items should i not give myself ? is it okay to give myself all the hex spells? or at-least the ones i don't have (climax e.t.c) or will that be to obvious? or something like lower my stats and memory down a lot and give myself giant lord souls to tweak my build perhaps? sorry i just have so many questions as i'm nervous to use it. rather not get banned for something silly like 2 stacks of something lol

ReDeMpTiOn213
06-25-2014, 04:48 PM
am i able to just lower my soul level on my character a little to get back to the good range? im 9m soul level but only level 227 which is a little high i guess, an way i can drop my level to say 200 and make my soul memory the minimum+ for that level?

To o back down level you have to subtract 27 skill points away from your skills. Besides level has nothing to do with online. Its your soul memory that effects your online play.

Spectralv
06-25-2014, 04:53 PM
that's what i mean. i just made a level 203 will it auto do the soul memory to look legit if i turned on the calculator? also will it catch me for only playing for 3 minutes and being a level 203 lmao

ReDeMpTiOn213
06-25-2014, 05:23 PM
that's what i mean. i just made a level 203 will it auto do the soul memory to look legit if i turned on the calculator? also will it catch me for only playing for 3 minutes and being a level 203 lmao

Yes it should autocorrect it if you have it on. So dont worry lol

venomor
06-25-2014, 07:07 PM
Nothing... I've tried but seems not work at all :003: Always the same problem, even with the restore stfs :003: I think I'm in deep s**t :123: