help with imgburn 2.5.5.0

[shinwg]

I am not what happen I can't burn anymore
Am using verbatim 2.4 speed I keep getting
this error L0 Data Zone Capacity...please any help.

I 16:18:26 ImgBurn Version 2.5.5.0 started!
I 16:18:26 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 16:18:26 Total Physical Memory: 3,987,312 KB - Available: 2,612,276 KB
I 16:18:26 Initialising SPTI...
I 16:18:26 Searching for SCSI / ATAPI devices...
I 16:18:26 -> Drive 1 - Info: hp CDDVDW TS-U633F HH05 (E:) (ATAPI)
I 16:18:26 Found 1 DVD±RW/RAM!
I 16:24:33 Operation Started!
I 16:24:33 Source File: C:\Users\Owner\Downloads\BulletStorm.XBOX360-COMPLEX\cpx-buls\cpx-buls.dvd
I 16:24:33 Source File Sectors: 3,827,488 (MODE1/2048)
I 16:24:33 Source File Size: 7,838,695,424 bytes
I 16:24:33 Source File Volume Identifier: DVD_ROM
I 16:24:33 Source File Volume Set Identifier: 3ac4c000MS UDFBridge
I 16:24:33 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:24:33 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:24:33 Source File File System(s): ISO9660, UDF (1.50)
I 16:24:33 Destination Device: [0:1:0] hp CDDVDW TS-U633F HH05 (E:) (ATAPI)
I 16:24:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 16:24:33 Destination Media Sectors: 4,173,824
I 16:24:33 Write Mode: DVD
I 16:24:33 Write Type: DAO
I 16:24:33 Write Speed: 2.4x
I 16:24:33 Link Size: Auto
I 16:24:33 Lock Volume: Yes
I 16:24:33 Test Mode: No
I 16:24:33 OPC: No
I 16:24:33 BURN-Proof: Enabled
I 16:24:33 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 16:24:33 Optimal L0 Data Zone Capacity: 1,913,760
I 16:24:33 Optimal L0 Data Zone Method: Copied From Original Disc
E 16:27:48 Set L0 Data Zone Capacity Failed! - Reason: The request could not be performed because of an I/O device error.
E 16:27:48 Operation Failed! - Duration: 00:03:15
I 16:27:48 Average Write Rate: N/A - Maximum Write Rate: N/A
I 16:28:24 Operation Started!
I 16:28:24 Source File: C:\Users\Owner\Downloads\v\ZARTHVENE.dvd
I 16:28:24 Source File Sectors: 3,827,488 (MODE1/2048)
I 16:28:24 Source File Size: 7,838,695,424 bytes
I 16:28:24 Source File Volume Identifier: DVD_ROM
I 16:28:24 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 16:28:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:28:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:28:24 Source File File System(s): ISO9660, UDF (1.50)
I 16:28:24 Destination Device: [0:1:0] hp CDDVDW TS-U633F HH05 (E:) (ATAPI)
I 16:28:24 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 16:28:24 Destination Media Sectors: 3,827,520
I 16:28:24 Write Mode: DVD
I 16:28:24 Write Type: DAO
I 16:28:24 Write Speed: 2.4x
I 16:28:24 Link Size: Auto
I 16:28:24 Lock Volume: Yes
I 16:28:24 Test Mode: No
I 16:28:24 OPC: No
I 16:28:24 BURN-Proof: Enabled
I 16:28:27 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 16:28:27 Optimal L0 Data Zone Capacity: 1,913,760
I 16:28:27 Optimal L0 Data Zone Method: Copied From Original Disc
I 16:34:26 Set L0 Data Zone Capacity Succeeded!
I 16:34:27 Filling Buffer... (40 MB)
I 16:34:28 Writing LeadIn...
W 16:40:26 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error.
W 16:40:26 Retrying (1 of 20)...
I 16:43:20 Abort Request Acknowledged
W 16:43:27 Retry Failed - Reason: The request could not be performed because of an I/O device error.
E 16:43:27 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error.
I 16:43:27 Synchronising Cache...
W 16:43:58 User opted to skip the 'Close Track/Session/Disc' functions.
E 16:43:58 Failed to Write Image!
E 16:43:58 Operation Aborted! - Duration: 00:15:33
I 16:43:58 Average Write Rate: N/A - Maximum Write Rate: N/A

[Sephiroth]

Imgburn =

Try

[shinwg]

Imgburn =

Try

k am about 2 try that i just hope is not my drive that mess up.

[pureIso]

imgburn always works fine for me mate.

[shinwg]

imgburn always works fine for me mate.

well imgburn was working fine at first, so maybe something wrong with my drive.

[cybersam]

that's the most probable reason to why imgburn doesn't work for you anymore ^-^
in any case have you tried clonecd to see if it's really your drive ?!...

[Ryudo]

Imgburn =

Try

Imgburn isn't trash at all.
It's one of the best free programs out there to be honest. :(

I've only used CloneCD to make proper rips of PSX CDs (.ccd/.sub/.img), other than that I don't use it anymore.

As for the actual problem at hand, it's an I/O Device error, so something might be wrong with the drive or the firmware of it.

[irule88]

img burn is great...I had the same issue then i realized i baught 8x disks and my drive was a 2.4x